ESS Centrifugal Mustang Superchargers

[Wolfys11]

I've seen this happen when the ring gear in the rear end is worn, whenever any amount of torque is applied it will make noise but when just coasting it is quiet

Theres no way i wore anything out, i have a 2023 with 3500 miles on it, and i literally just added the ess and longtubes like weeks ago lol, at least i hope i didnt wear something out already

Sponsored

 

[Wolfys11]

Do you have 3.73's?

I have mt82 non performance pack so i believe its something like 3.55? Someone can correct me on that

 

[lkeltner]

This over the continental lines from the UPR Kit?

Yep. Those stock lines with the UPR kit are not fuel and oil rated. They look like multipurpose air lines from what i can find. Oil vapor seeps right thru in no time.

 

[gameovergt]

Go big or go home brother!! Who doesn’t love race car problems by doing all that?

Us poor folk who work for a living. Lol.

 

[HAVOC_5.0]

Some of us have problems. We cope with them by modifying these things lol

 

[Whitedevil95]

Some of us have problems. We cope with them by modifying these things lol

View attachment 785322

I thought this was your garage for a second. I was very Jealous.

 

[HAVOC_5.0]

I thought this was your garage for a second. I was very Jealous.

Nope. One of my garages I manage lol

But we had some failures on my car. Replacing both rear hubs, hardware, and sensors

 

[Wolfys11]

Nope. One of my garages I manage lol

But we had some failures on my car. Replacing both rear hubs, hardware, and sensors

Wish i had access to a shop, ive done everything ive ever done in the driveway, maybe in a few years when i get a house i can get a half lift in the garage or something

 

[HAVOC_5.0]

Wish i had access to a shop, ive done everything ive ever done in the driveway, maybe in a few years when i get a house i can get a half lift in the garage or something

I love lifts lol

 

[MarquanTR]

Do the first one you linked to since you aren’t worried about race car smells and gut the PCV. Yes you can run it n/a before the SCer is installed.

Thanks for the advice! I’ll be ordering soon, and even if I end up not boosting the car, it’ll be good to have.

 

[MarquanTR]

I agree with Billy. You'll also want to think about buying the One Way Oil Fill Breather and the Billet PCV from them. Just makes things easier for install and initial setup.

Call in and ask to speak to "the catch can man" and he'll hook you up. Just tell him the guys from 6G told you to talk to him.

Thank you for your help! I haven’t had the time to call in due to work/school but I’ll be calling and ordering shortly. I’ll make sure to get the billet PVC and One way Oil Fill Breather .

 

[Wolfys11]

What hp and boost should 93 pump gas g3x 120mm at sea level be at? At like about 50 ish degrees farenheit? Im going to be dynoing and getting a boost gauge soonish and i wanted to reference to know my setups 100% tip top shape

 

[SheepDog]

What hp and boost should 93 pump gas g3x 120mm at sea level be at? At like about 50 ish degrees farenheit? Im going to be dynoing and getting a boost gauge soonish and i wanted to reference to know my setups 100% tip top shape

7400 RPM, 8.236 PSI, 681.234684 HP

 

[jmagnus87]

And if you're me, 560 on a mustang dyno and 620 on a dyno jet

 

[HAVOC_5.0]

What hp and boost should 93 pump gas g3x 120mm at sea level be at? At like about 50 ish degrees farenheit? Im going to be dynoing and getting a boost gauge soonish and i wanted to reference to know my setups 100% tip top shape

3.141592653589773238462643383279502884197169399375105820974944592307816406386208998628034825

Sponsored