Edelbrock 2650 Warranty 2019 GT goes to the track!

[100mphclub]

OP I don't believe anyone said you should be in the 8's or even 9's but your setup should be very capable of 10's. I know EB tune is conservative but your mph is really low. As far as the A10 on E85 you might want to check out jmeiers thread in the dragstrip section. He goes 11.0 @ 125 mph on a lightly modded setup!

Edit: I saw it with my own eyes, it was really impressive!

I'll check it out. Thanks! In my second video you should understand my low trap speed better. It's a 3.55 car hitting a transmission limiter in 6th at 120mph. Testing a tune fix for it when I can. I had hoped to this weekend, but they are predicting snow in my area. :/

Sponsored

 

[brucelinc]

100mphclub, is your tune capable of adding timing with higher octane?

 

[brucelinc]

OP I don't believe anyone said you should be in the 8's or even 9's but your setup should be very capable of 10's. I know EB tune is conservative but your mph is really low. As far as the A10 on E85 you might want to check out jmeiers thread in the dragstrip section. He goes 11.0 @ 125 mph on a lightly modded setup!

Edit: I saw it with my own eyes, it was really impressive!

I agree that is impressive. The DA was around negative 1000 if I recall. I would love to run in that kind of air.

 

[Torinate]

Saw your video from last night... bummer.

Hope you get some positive news today!

Sorry... can’t help you with the codes... have. It seen those ones...

 

[100mphclub]

Saw your video from last night... bummer.

Hope you get some positive news today!

Sorry... can’t help you with the codes... have. It seen those ones...

Appreciate it. Hopefully it's progress in the right direction and nothing was actually hurt. Scared me... but drove the car to work this morning. And I guess I can edit video fast when needed. lol

Emailing the new data log file to Edelbrock now.

 

[100mphclub]

Link for those not subscribed:

 

[Stymee]

Keep us updated on what they find

 

[Zinc03svt]

I looked at his logs. Car is hitting torque source 7 on shift into 7th. That is Torque Shift Modulation, transmission. Tune related. Fyi.

 

[Stymee]

Which means?

 

[Zinc03svt]

Which means?

Hitting a TCU rpm limiter.

 

[Stymee]

Hitting a TCU rpm limiter.

Hitting a TCU rpm limiter.

Hmmmm, that should be an easy fix for EB to cancel out

 

[Zinc03svt]

Hmmmm, that should be an easy fix for EB to cancel out

I don’t think they touch the trans tuning on stage 1. Yet? Lol.

Also getting 2 plus counts knock and holds pretty steady in 6th gear. I would be more concerned about that first.

 

[Stymee]

I don’t think they touch the trans tuning on stage 1. Yet? Lol.

Also getting 2 plus counts knock and holds pretty steady in 6th gear. I would be more concerned about that first.

For sure, u don't want KR at all, I forgot they don’t touch trans tuning (Yet)

More tuning to be done
Hello Edelbrock

 

[Zinc03svt]

For sure, u don't want KR at all, I forgot they don’t touch trans tuning (Yet)

More tuning to be done
Hello Edelbrock

Max wot timing 13 to 13.25 until 6th gear it bleeds down to 11ish. They may need to taper the timing down in higher gears. A/F 11 to 11.8.

 

[Stymee]

Max wot timing 13 to 13.25 until 6th gear it bleeds down to 11ish. They may need to taper the timing down in higher gears. A/F 11 to 11.8.

Damn, 13 degree’s down to 11at WOT at 11AF doesn’t seem to bad? Maybe fuel octane is lame?

Well he is approaching 11.8AF, although that’s not horrible for a boosted application with soft timing at 9-10psi?

Sponsored