Off2jail
Well-Known Member
- Joined
- Feb 20, 2019
- Threads
- 33
- Messages
- 157
- Reaction score
- 21
- Location
- Newfoundland, Canada
- First Name
- Shaun
- Vehicle(s)
- 2015 Mustang GT Hellion TT
- Thread starter
- #16
I have 7.5 psi springs. To make 10.7 psi, I used:5lb springs. Gate is 5 lbs. Trying for 8
SP 20
GP 7
SN 20
This was my BG1 (Boost Group 1)
For your SP, try to go increments of 5. GP should be 4-5 psi below your target boost. SN should always be 20.
Set your OBS (overboost) so you don’t grenade anything when you are making changes with the controller.
I hope this helps.
Shaun
Sponsored