Sponsored

Eboost2 settings? Hellion TT

OP
OP
Off2jail

Off2jail

Well-Known Member
Joined
Feb 20, 2019
Threads
33
Messages
157
Reaction score
21
Location
Newfoundland, Canada
First Name
Shaun
Vehicle(s)
2015 Mustang GT Hellion TT
5lb springs. Gate is 5 lbs. Trying for 8
I have 7.5 psi springs. To make 10.7 psi, I used:
SP 20
GP 7
SN 20

This was my BG1 (Boost Group 1)

For your SP, try to go increments of 5. GP should be 4-5 psi below your target boost. SN should always be 20.

Set your OBS (overboost) so you don’t grenade anything when you are making changes with the controller.

I hope this helps.

Shaun
Sponsored

 

15GTPP

Well-Known Member
Joined
Jan 13, 2015
Threads
35
Messages
423
Reaction score
221
Location
El Paso
First Name
Chris
Vehicle(s)
2019 GT
For 8lbs I’d try:

Sp: 15
Gp: 3-4
Sn: 20

Like the guy above said work in increments of 5 for Sp.
 

Sandro6454

Well-Known Member
Joined
Dec 29, 2019
Threads
30
Messages
94
Reaction score
11
Location
Dearborn
First Name
Alessandro
Vehicle(s)
2019 Mustang GT PP1 401A
I also have an Eboost 2 With my Hellion TT
my car keeps over boosting and boost spiking I’m trying to figure it out with settings if anyone can chime in and help let me know for example

On 12 LBS sensitivity 20 and GP at 8 Boost Cut off at 16 the car is over boosting and boost spiking
 
OP
OP
Off2jail

Off2jail

Well-Known Member
Joined
Feb 20, 2019
Threads
33
Messages
157
Reaction score
21
Location
Newfoundland, Canada
First Name
Shaun
Vehicle(s)
2015 Mustang GT Hellion TT
I also have an Eboost 2 With my Hellion TT
my car keeps over boosting and boost spiking I’m trying to figure it out with settings if anyone can chime in and help let me know for example

On 12 LBS sensitivity 20 and GP at 8 Boost Cut off at 16 the car is over boosting and boost spiking
Hi,

Lower your GP. Start at 3-4 and re-test. Add GP in low increments until you lose your spike.

Shaun
Sponsored

 
 




Top