Hellion TT Kit

[Kryckter]

I also ordered direct from Hellion. However I haven't been able to get ahold of them to hear a time estimate... Hopefully I'm included in the group that ships next week

Sponsored

 

[OneTrickPony]

Is there an option to route the dual air intakes someplace other than right off the turbine side, sitting inches from the "red hot" engine? I realize available space is probably very limited by the additional FMIC setup. Would a pump driven Air-to-Water IC setup allow for pulling in air from nearer to each front corner well? Ideally finding a way to modify those small side grills that bookend the main grill to give a true cold-air induction path.

 

[OneTrickPony]

any photos from down below to see how the exhaust headers route up front to the twin compressors and how the BPV/BOV piping runs, as well as the downpipe runs back into the primary dual exhaust setup. Does this system "dump" open or have provisions for return gases into the exhaust manifold?

 

[z06psi]

You will have the fastest, most powerful system on the planet very soon!

That's pretty bold. Do you guys a S550 down the track yet below a 9.59?

Maybe something we haven't seen?

 

[HELLION TURBO]

That's pretty bold. Do you guys a S550 down the track yet below a 9.59?

Maybe something we haven't seen?

We have a few projects that will be public very soon.

We have made the most recorded RWHP and torque with the factory 2015 GT engine to this point, and we have the capability to make over 1400 rwhp with a built engine.

Not all of our customers go the the dragstrip, but we can assure you from a nice roll our system will end up out front;).

We respect all manufacturers and products, but we believe lb for lb that we have the best value on the market for the 2015 GT.

If you have any questions please feel free to contact us, 505-873-4670.

Team Hellion

 

[Kryckter]

Some of parts have arrived

I have heard the rest of my kit should ship early next week.

 

[H35]

It's definitely worth the wait!!

 

[Chevpwr]

Are those the 55's, or the 62's?

 

[Kryckter]

Are those the 55's, or the 62's?

55's

 

[Chevpwr]

Turbos and intercooler came in last week, piping came in today, and now is on its way to be coated!

 

[esacteksab]

Turbos and intercooler came in last week, piping came in today, and now is on its way to be coated!

They don't come coated? Not an option to be coated?

 

[Chevpwr]

They don't come coated? Not an option to be coated?

They don't come coated. You can get them coated from Hellion, but it takes quite a bit longer, and is more expensive than having it done yourself.

 

[esacteksab]

They don't come coated. You can get them coated from Hellion, but it takes quite a bit longer, and is more expensive than having it done yourself.

Just using a local powder coater? I saw one vendor charged $675 for high temp coating.

 

[Chevpwr]

Just using a local powder coater? I saw one vendor charged $675 for high temp coating.

My shop has someone they use, and it was quite a bit less than that.

 

[esacteksab]

My shop has someone they use, and it was quite a bit less than that.

Did you order a tuner kit?

Sponsored