E85/bolt ons

[DougS550]

What was your RWHP? Also what injectors are you using?

My RWHP was 917, 683 TQ, Crank HP was 1108 HP, 844 TQ. NOTE: My limitations to my KPM 1500 with PCM is Engine Crank HP, Not Rear Wheel HP.
- My injectors are ID1050X.
- 1st pull was with Smoothboost at 100% Max setting
- 2nd Pull was Smoothboost set to 50%
- 3rd pull was smoothboost set to Minimum

Sponsored

 

[Headless Horseman]

Nice! I have KPM1000 and ID 1050X Injectors, but I'm not boosted. I had plans on staying N/A. Now that I'm running out of mods I may just go with ESS. My limits with boost will be whatever the KPM1000 allows on E85.

 

[DougS550]

Nice! I have KPM1000 and ID 1050X Injectors, but I'm not boosted. I had plans on staying N/A. Now that I'm running out of mods I may just go with ESS. My limits with boost will be whatever the KPM1000 allows on E85.

One thing about Dave is, he responds back in a reasonable time. (Australuans) Dave will tell you at what power level the KPM 1000 has. Plus, all of these kits are upgradable.

 

[03Terminator&2020S550]

It pushed my power to 469 whp and 434 wtq. I also added a 150 shot of nitrous, bumping power to 639 whp and 602 wtq, and that still wasn’t enough. Now I’m back looking for more with a turbo.

It sounds like boost is on your mind. If so, I recommend waiting on the tune until you get all mods in place, so that you don’t have to pay twice for the tune.
[/QUOTE

How are you running a 150 shot I am hearing of people blowing their motor on 100 shots? I'm right at 866whp now supercharged and I am thinking of running a 75 shot hopefully get over 950 did you ever run into issues with the 150 shot?

Sponsored