Catch Can PCV Fix questions

[Tune+]

Nope, it is easier than installing an intake. If you follow the instructions above it is really easy when it is in front of you.

Sponsored

 

[therealdannye]

Nope, it is easier than installing an intake. If you follow the instructions above it is really easy when it is in front of you.

Haha, my paranoia is probably unfounded then. The CAI was pretty damn easy. :lol:

 

[Tune+]

Exactly.

 

[Bennington]

Anyone have torque specs on reinstalling the intake bolts?

 

[Tune+]

Anyone have torque specs on reinstalling the intake bolts?

20ft/lbs - 240in/lbs

 

[Bennington]

Thank you sir!

 

[ranger11x]

Boomba also has a video of them removing the intake mani as well. It's in their intake spacer install

 

[evan546]

I was able to install my catch can without removing the TB and now i just need to remove the PCV i noticed that is on a swivel. Could I pull it up and out from the breather box to gut it or does the TB really need to be removed

Sent from my SM-G900P using Tapatalk

 

[JungleG1337]

I bought the UPR Checkvalve, now Im trying to figure out which line I need to cut and place the checkvalve withe arrow pointing downward.

Adam can you point me to the right place sir?

 

[evan546]

I bought the UPR Checkvalve, now Im trying to figure out which line I need to cut and place the checkvalve withe arrow pointing downward.

Adam can you point me to the right place sir?

How did you gut yours? Did you pull the pcv out? Or the whole box?

Sent from my SM-G900P using Tapatalk

 

[Tune+]

I was able to install my catch can without removing the TB and now i just need to remove the PCV i noticed that is on a swivel. Could I pull it up and out from the breather box to gut it or does the TB really need to be removed

Sent from my SM-G900P using Tapatalk

Intake manifold, not throttle body.

The PCV has a ring on it, that is the main reason I tell everyone to remove the intake manifold. If you break that ring you are going to have to buy a whole new breather box assembly.

 

[JungleG1337]

Where can the cut be?

Thanks

 

[Tune+]

Where can the cut be?

Thanks

You cut the bottom off that goes into the breather box and gut the insides. Make sure you have a check valve/UPR kit.

 

[JungleG1337]

I have the upright check valve. I'm not sure why the picture didn't show up. Thanks. I'll try to record the process to help other Bros out.

 

[Tune+]

I have the upright check valve. I'm not sure why the picture didn't show up. Thanks. I'll try to record the process to help other Bros out.

I'll be posting a video next week.

Sponsored