Bullitt's rear brakes

[aileron]

Are the puny rear calipers that come on our Bullitts really "Brembo" manufacture or design, or is it only the front calipers? A guy on the other Bullitt thread is telling everyone the cast iron rear Ford calipers are indeed "Brembo"

https://www.mustang6g.com/forums/threads/car-show-suggestions.164273/

Sponsored

 

[AnthonyA1234]

Are the puny rear calipers that come on our Bullitts really "Brembo" manufacture or design, or is it only the front calipers? A guy on the other Bullitt board is telling everyone the cast iron rear calipers are indeed "Brembo"

From what I understand the brembos are just the front two six piston calipers while the rear two are just normal Ford four piston brakes painted red to match

 

[Tacswa]

Pretty sure its the front only

 

[cmxPPL219]

On the GT PP1/PP2/Bullitt cars, Brembos are the front calipers and front pads only. Front and Rear rotors are Ford, and rear caliper and pads are also Ford.

 

[aileron]

Thanks, that 's what I thought too but wanted to check with others more knowledgeable than me

 

[krishelnino]

From what I understand the brembos are just the front two six piston calipers while the rear two are just normal Ford four piston brakes painted red to match

The rear brakes on GT, Mach 1 and Bullitt are only single piston.

 

[AnthonyA1234]

The rear brakes on GT, Mach 1 and Bullitt are only single piston.

Really? So are the front brembos 6 or 4 pistons then?

 

[spaz mk will]

Really? So are the front brembos 6 or 4 pistons then?

Front Brembo 6
Front regular GT 4

 

[AnthonyA1234]

Front Brembo 6
Front regular GT 4

Ohh ok that makes sense. I never noticed the front brakes where bigger on the gt

 

[spaz mk will]

Ohh ok that makes sense. I never noticed the front brakes where bigger on the gt

Ecoboost has a 12.5”/2 piston front . Eco PP/HPP get the base GT 14”/4 pistons. Brembo fronts are 15”/6

Sponsored