Alignment check

[Lbj]

All right i need your opinion i don't no much about alignment i had put on new lowering springs then had it aligned douse this look good thanks

Sponsored

 

[EdwardS550]

Whoever did that alignment took their time and did a great job. Not only are the numbers within spec but they're extremely close left to right. I'm sure the car drives straight as an arrow.

 

[Lbj]

Thanks Edwards550 the guy also has a mustang i just making sure it is right

 

[galaxy]

Eehhhh, the rear toe could be better. And closer together would get rid of that thrust angle.

 

[Dana Pants]

I assume this is a street car?

Front toe-out is a horrible thing, as it eats tires on these cars. I would target 0.16 degrees front total toe-in. This is equivalent to 1/16 inch total toe-in.

All else looks very street-car to me.

P.S.: 0.08 degrees is 1/32 of an inch... which anything below is falling quickly into numbers that cannot be reliably measured. a thrust angle of 0.02 is pretty much the same as zero.

 

[Lbj]

Dana pants yes it's a street car ..i don't know anything about getting a alignment toe on toe out it's just numbers on paper to me sorry about that you are saying i need the toe brought in some more..

 

[Dana Pants]

For longest tire life, the circled number should say 0.16.

 

[Lbj]

Thank you

 

[bankyf]

Do you have camber plates or adjustable camber bolts? I definitely would not say that the person took their time and did a great job. That is a mediocre alignment that is one step above a toe and go. There is a reason they aren't using the report that shows graphs.

 

[Lbj]

I think i will go to a different shop and have it check out

 

[MyStang]

Got this done today, any input would be greatly appreciated.
lowered on Eibach pro kit.

Sponsored