Leonidas514
Well-Known Member
- Joined
- Feb 25, 2021
- Threads
- 33
- Messages
- 234
- Reaction score
- 95
- Location
- Oviedo, FL
- First Name
- Chad
- Vehicle(s)
- 2015 GT
- Thread starter
- #1
What's up everybody. It's been a while, just been doing tons of work and mods to the car. Finally got it all back together and decided to switch tuners from PBD to Lund.
I'm doing my initial logs with Lund and was wondering if anyone knows if Lund and PBD dyno use the same air load data? My car only shows 1.78 @6500 with the Lund tune but on the PBD tune at the same 6500 showed 2.20. I'm thinking I've got a boost leak. Or, I also moved the MAF from the IC to the intake tube, would this cause a lower reading? I'm sure Lund will reply in the morning but was just curious.
I'm doing my initial logs with Lund and was wondering if anyone knows if Lund and PBD dyno use the same air load data? My car only shows 1.78 @6500 with the Lund tune but on the PBD tune at the same 6500 showed 2.20. I'm thinking I've got a boost leak. Or, I also moved the MAF from the IC to the intake tube, would this cause a lower reading? I'm sure Lund will reply in the morning but was just curious.
Sponsored