Aggressive Fitment Thread

[Streetcar]

Does not appear I have any of those at the moment. Will snap a few tomorrow and post.

Really appreciate it also what wing and any other body mods? This just convinced me to get an 18

Sponsored

 

[Streetcar]

Does not appear I have any of those at the moment. Will snap a few tomorrow and post.

And do you have an ig?

 

[AZ18yote]

And do you have an ig?

Actually I do not

 

[Stanced]

I have a question for the alignment gurus. I am running a 20x10 with a +35 offset 28535r20 tires on sportline springs. I am getting some tire rubbing while turning. Would adding some negative camber help the situation or is my best option raising the car back up with some different springs?

Either more camber, a shorter tire or roll your fenders.. It's probably rubbing where the fender meets the bumper. My car is pretty low and I'm running a 19x11 +30 305/30 with -2 camber, which sticks out about 15mm more than your setup, but it's also more than an inch shorter. It doesn't rub.

 

[kevstach]

Either more camber, a shorter tire or roll your fenders.. It's probably rubbing where the fender meets the bumper. My car is pretty low and I'm running a 19x11 +30 305/30 with -2 camber, which sticks out about 15mm more than your setup, but it's also more than an inch shorter. It doesn't rub.

Thanks. It's actually rubbing at the top of the inside of the fender when turning. I may try to add some more camber to resolve the problem.

 

[AZ18yote]

Really appreciate it also what wing and any other body mods? This just convinced me to get an 18

Here is the level side shot. Not a great pic but gives you an idea. On Ford Performance springs so the drop is minor compared to some only about 1" but ride is still smooth. May consider swapping later for an additional 1/4 - 1/2" drop.

The spoiler you see is the 2018 performance pack spoiler.

 

[Stage_3]

Man, that looks insanely nice.

 

[GTthree50]

What you guys think about this simple but clean design

BC Forged RT50 Wheels



​

These wheels will be going up for sale in the coming weeks.

 

[1crazymach]

Just purchased a set of PP Level 2 wheels having them powder coated black. wanting to go staggered look. 285/35/19 and 325/30/19. I really don't want to lower my 2018 PP as the ride went to shit on my 16. Anyone have this set up pics please? also if I do have to lower the PP2 wheels might have a poke?

 

[AZ18yote]

Either more camber, a shorter tire or roll your fenders.. It's probably rubbing where the fender meets the bumper. My car is pretty low and I'm running a 19x11 +30 305/30 with -2 camber, which sticks out about 15mm more than your setup, but it's also more than an inch shorter. It doesn't rub.

Are you on coilovers or what suspension setup?

 

[1crazymach]

Nasty

 

[Stanced]

Are you on coilovers or what suspension setup?

BC coilovers

 

[AZ18yote]

BC coilovers

Looks great!

 

[Bahndvr]

XXR 530 19X10.75 +35 Chromium Black (squared) with Michelins 305X19

 

[S550MG]

XXR 530 19X10.75 Chromium Black with Michelins

Do you have Brembos? If so did you have to run spacers up front to clear? I have been wondering if these wheels cleared. Looks good.

Sponsored