Aggressive Fitment Thread

[FlowForm_Wheels]

I don't think we've posted these up here yet, so installed are a set of FlowForm FF15 wheels powdercoated in Fog. 18x10.5 square with 305/35/18 Toyo R888's which turn this car into a real track monster. Wheels weighing in at 21.4lbs we're looking at a very significant drop in un-sprung weight compared to the factory wheels which weigh 32.6lbs front and 33.3lbs rear -
for just the wheel alone that's 11lbs less for the fronts and a 12lbs less for the rears!

​

Sponsored

 

[Blackbeauty]

I don't think we've posted these up here yet, so installed are a set of FlowForm FF15 wheels powdercoated in Fog. 18x10.5 square with 305/35/18 Toyo R888's which turn this car into a real track monster. Wheels weighing in at 21.4lbs we're looking at a very significant drop in un-sprung weight compared to the factory wheels which weigh 32.6lbs front and 33.3lbs rear -

for just the wheel alone that's 11lbs less for the fronts and a 12lbs less for the rears!

I think my cousin has the same one on his mustang.

Sent from my iPhone using Tapatalk​

 

[Need4SpeedMotors]

Yep same ones !

 

[mike@vossen]

With our upcoming Vossen x Work two piece wheels, you can choose up to 13" widths and negative 70 offsets For those that want to really get aggressive

 

[Blackbeauty]

With our upcoming Vossen x Work two piece wheels, you can choose up to 13" widths and negative 70 offsets For those that want to really get aggressive

I can't tell in the pic, is that dish or really concave?


Sent from my iPhone using Tapatalk

 

[RubyRed15]

Intrigued... when are full details available?

 

[mike@vossen]

I can't tell in the pic, is that dish or really concave?


Sent from my iPhone using Tapatalk

It would depend on your fitment. The deeper we can go then we can make the wheel more concave. The less deep we can go means less lip and less concave.

 

[fordguys550]

Dude those are siiiiick

 

[mike@vossen]

Intrigued... when are full details available?

Likely next month... for now 19s and 20s...up to 13" widths...we will have standard colors and be able to offer custom colors as well...

I'm here spilling the beans:lol:

 

[RubyRed15]

I like beans.

Lightweight? <25lbs for a 19X10"?

 

[mike@vossen]

I like beans.

Lightweight? <25lbs for a 19X10"?

Our Vossen Forged Wheels are lighter....not sure of all the weights yet, it depends on offset too. I'll have more beans soon!:bolt:

 

[Supa LA]

I'm assuming they'll be somewhere in the ballpark of $1k per wheel? They look GREAT tho. I'd sell the Forgestars for those, quickly.

 

[altjx]

I'm assuming they'll be somewhere in the ballpark of $1k per wheel? They look GREAT tho. I'd sell the Forgestars for those, quickly.

Vossen make wheels less than $2k per wheel? What?!?!?! :eyebulge:

Lol Those wheels look so sick Mike! As do all them, especially the VPS series!

 

[Chris796]

I'm assuming they'll be somewhere in the ballpark of $1k per wheel? They look GREAT tho. I'd sell the Forgestars for those, quickly.

Lol probably $8500+ a set


Sent from my iPhone using Tapatalk

 

[altjx]

Lol probably $8500+ a wheel

Sent from my iPhone using Tapatalk

Fixed.

Lol probably $85,000+ a set

Sent from my iPhone using Tapatalk

Oh wait fixed again.

I'm just mad because I wanted those VPS 302s that Brian had on, lol. All set now though. Maybe for the next stang

Sponsored