2019 Comp cams stage 2 NSR installed!

[Slamdcoop0428]

Are these the
Stage 2 Mutha' Thumpr NSR 232/242 Hydraulic Roller

or

Stage 2 XFI NSR 232/234 Hydraulic Roller??

They are the 232/234

Sponsored

 

[Idaho2018GTPremium]

What are the stock cam duration specs. @ 0.05" lift and lobe sep.? I know the stock Gen 3 cams are 14 mm lift (0.551") but do not know their duration or lobe sep.

 

[IrishStallion]

They are the 232/234

Do have a noticeable cam chop at idle? I think the 228/238 stage 1 thumper might be an option.

 

[Slamdcoop0428]

What are the stock cam duration specs. @ 0.05" lift and lobe sep.? I know the stock Gen 3 cams are 14 mm lift (0.551") but do not know their duration or lobe sep.

Not sure on that one.

 

[Slamdcoop0428]

Do have a noticeable cam chop at idle? I think the 228/238 stage 1 thumper might be an option.

Occasionally I’ll hear a little something but more times than not it’s like stock.

 

[drive_55_not]

Thanks man! Yeah tell me about lol. So crazy compared to the 6r80.

It's been raining here so I called ProTorque and asked about restalling the 10R converter as they offered the 1st restalled 6R back in the day.

I told him I was staying NA and don't feel like shelling out 2grand for a 'verter he said they should have something available this fall.

Hopefully they will be a cheaper option.


.

 

[IrishStallion]

Occasionally I’ll hear a little something but more times than not it’s like stock.

How much weight (if any) did you pull out of the car when you made that 130 mph trap run?? Full setup specs please.

 

[Slamdcoop0428]

How much weight (if any) did you pull out of the car when you made that 130 mph trap run?? Full setup specs please.

Hey, car has TBM front brakes, BMR k member and dumped exhaust for track runs only. Had LTH make some easy to swap over dumps

 

[Ivan214]

any more updates? Is this the max for N/A power other more weight reduction?

 

[Idaho2018GTPremium]

any more updates? Is this the max for N/A power other more weight reduction?

I don't think he's touched the heads, so there's more power with a Stage 3 or 3R port job. Although, 3R wouldn't be good for the street.

 

[Nawsad123]

New to this Forum, but having the Stage 1 Comp Cams installed on my coyote next week. Any idea how much hp gain thatll be? Comp Cams Stge 1 CR NSR 231/237

 

[jmeiers]

New to this Forum, but having the Stage 1 Comp Cams installed on my coyote next week. Any idea how much hp gain thatll be? Comp Cams Stge 1 CR NSR 231/237

If you are going to do it, get the Stage 2 cams and also a ported CJ.

 

[Nawsad123]

If you are going to do it, get the Stage 2 cams and also a ported CJ.

Trying to run a modest street setup. With the stage 2/3 there may be idle issues since its an automatic. Coyote already has a Vortech Supercharger, billet oil pump, headers, full exhaust, intake, rib drive upgrade, 1000cc injectors...pushing about 640 rwhp. Hoping to be at 700 after Cams

 

[TX5OH]

Trying to run a modest street setup. With the stage 2/3 there may be idle issues since its an automatic. Coyote already has a Vortech Supercharger, billet oil pump, headers, full exhaust, intake, rib drive upgrade, 1000cc injectors...pushing about 640 rwhp. Hoping to be at 700 after Cams

Gen 2 Coyote? I can look at it in my dynosim software. I’ve got mine setup in it because I’m using it to determine what cams I want. What Vortech are you using? Boost? And what intake do you have on it currently?

Those cams will idle fine with an auto.

 

[Nawsad123]

Gen 2 Coyote? I can look at it in my dynosim software. I’ve got mine setup in it because I’m using it to determine what cams I want. What Vortech are you using? Boost? And what intake do you have on it currently?

Those cams will idle fine with an auto.

Vortech V3 supercharger, Ford Performance GT350 intake...right around 9 lbs of boost. Dropping it off for the stage 1s tomorrow and should be done by next weekend.

Sponsored