2015/2016 EU Mustang - Lightning stuff

[John577]

The link doesn't work for me ...

Sponsored

 

[Warrior]

Sorry, this one should work, its the one on the first page in your post

http://www.diodedynamics.com/store/led-bulbs/listed-by-size/7440/7440-11w-hi-power-leds-pair

 

[John577]

Yes they should work, as mentioned in the first post, [MENTION=21385]GTGreg[/MENTION] installed them on his car without a problem.

Don't forget to order a set of resistors or you'll have a fast blinking on the Dashboard

 

[Warrior]

okey, so you need the resistors too. Because it was not mensioned with this link only at the link above it was mensioned.

Sry but i dont know a lot of these things.

 

[John577]

Whatever the bulb you'll put as turn signal you need a resistor.

As the LED draws less power than a halogen bulb, the ODB will think that the bulb is dead, for this we have the fast blinking on the dash.

 

[papinist]

Better to not talk about C. to avoid our threads to be closed

 

[Ace]

Saw the Tribar solution I want to get in person on saturday on a Mustang meeting. Totally awesome, especially the really bright DRL makes the car look even more menacing, can't wait to get mine installed :cheers:

I made a short video of the tribars:

[ame]

 

[papinist]

Yeah, it's just how a 6th gen should looks like! When you see something like this in your rearview mirror you want to park at the side of the road to let it pass

We should get our tribar mod topic re-opened :-/
http://www.mustang6g.com/forums/showthread.php?t=38374

 

[John577]

Yeah, it's just how a 6th gen should looks like! When you see something like this in your rearview mirror you want to park at the side of the road to let it pass

We should get our tribar mod topic re-opened :-/
http://www.mustang6g.com/forums/showthread.php?t=38374

+1

I totally agree with that

 

[Notes]

Saw the Tribar solution I want to get in person on saturday on a Mustang meeting. Totally awesome, especially the really bright DRL makes the car look even more menacing, can't wait to get mine installed :cheers:

I made a short video of the tribars:

Cool, any info on who did the mod's/install etc? And any way to switch it of as well for our inspections? Thx

 

[papinist]

Cool, any info on who did the mod's/install etc? And any way to switch it of as well for our inspections? Thx

you can simply place a switch on the + wire. The UNNAMED did it ;)

 

[Voodoo077]

Cool, any info on who did the mod's/install etc? And any way to switch it of as well for our inspections? Thx

+1

Thx [MENTION=12253]papinist[/MENTION]for wire on "+"

 

[John577]

Or, if it's done like mine, between the wires inside the Headlight and the wires you need to conect to the car, you have a connector.
Simply remove it, do the control, and plug it back

 

[papinist]

Actually there are two '+' wires, one is switched power coming from the windshield wipers motor and the other from the parking lights (needed to dim tribars when lights are on)
There is also a third '+' wire that you need to connect to a permanent 12v from the fuse box. This is the power for the sequential turn lights. Simply remove the fus to disable seq turn
These info should be in the tribar thread, so could be useful for someone searching for it!

 

[John577]

Yes that's also true. I always refer to my "specific" installation with DD's LED boards. As it's a bit the same but in a different way lol

Sponsored