2015/2016 EU Mustang - Lightning stuff

[Stark]

Why are these LED bulbs so stupidly expensive...reminds me of the days when PLASMA and LED TVs first came out lol

Sponsored

 

[John577]

Why not buy something like this with a P13W socket ??

http://www.aliexpress.com/item/H7-H...-1&btsid=67bc4f96-c935-4ca1-bc0a-ceb914fe367b

 

[UNtamed67]

From my experience, all bulbs with such a big piece of plastic between LEDs and Socket would not fit into our lights ...

according to Donkarlos 37,98mm would fit (Konik one from AUS)...
All of these on Ali have the plastic and the Konik one in the measurement as well ??
This would mean none of the Ali ones can be used....?

 

[John577]

Yes but the piece of plastic on the konik bulb is really smaller than all others.

The bulb in the picture I posted is exactly the one I bought and it had a width problem. It don't go inside.

 

[UNtamed67]

more more more...getting crazy

Is Konik an Australian brand?

http://www.miniinthebox.com/nl/inde...0&sid=vsqe00cs3j1hckl6sn390aesq6&keyword=p13W

 

[John577]

Lol yea you will getting crazy before that you find the right one

 

[Rev_B]

I'm also looking for those "thin" P13W led lights, not only for the upcoming Mustang, but also for a 2014 Mitsubishi Outlander that also uses ugly P13W halogen DRL lamps, and I already tried 3 pairs of those cheap P13W leds, and they don't fit.

Those Konik seem perfect, but only australians sell them??

 

[NicoMCH]

Those Konik seem perfect, but only australians sell them??

It seems it is an australian brand

http://www.konik.com.au/?page_id=51

 

[Rev_B]

Yep, but I find hard to believe that chinese manufacturers failed to see the market about those thin P13w leds... [emoji6]

 

[NicoMCH]

Yep, but I find hard to believe that chinese manufacturers failed to see the market about those thin P13w leds... [emoji6]

Yes or even the Japanese since Konik developped those for the Mazda CX5 at first.

 

[Voodoo077]

a lot of good info again here in this topic, thx all who contributed.
If you want to change most to LED the solution from Australia seems very good.
However if you want to order in Europe what is then the best solution?
This does not look so clear to me maybe also because there is no a solution?
My main concern will be the DRL (fog) first.

 

[YLA G]

Not sure what is your question but to order it is simple via ebay?

the DRL = the ring (like on BMW, but nicer ), the fog is H3

 

[Voodoo077]

Not sure what is your question but to order it is simple via ebay?

the DRL = the ring (like on BMW, but nicer ), the fog is H3

What I meant is the lights that are used as DRL (without mod) when you do NOT put your lights on are non LED. I thought there were where fog light is.
This I would like to change asap when car is here to LED. So question was to find easiest (cheapest) working solution.
I seem to be a noob when it's about lighting :frusty:

 

[John577]

What I meant is the lights that are used as DRL (without mod) when you do NOT put your lights on are non LED. I thought there were where fog light is.
This I would like to change asap when car is here to LED. So question was to find easiest (cheapest) working solution.
I seem to be a noob when it's about lighting :frusty:

The best way for you is to buy the Konik LED bulbs. They are really plug & play on the car. All other LED bulbs don't fit in place.

 

[YLA G]

What I meant is the lights that are used as DRL (without mod) when you do NOT put your lights on are non LED. I thought there were where fog light is.
This I would like to change asap when car is here to LED. So question was to find easiest (cheapest) working solution.
I seem to be a noob when it's about lighting :frusty:

By default in the EURO version, the DRL is in the fog (2 different bulbs). So the cables are already at the right spot.

Sponsored