1320INC
Well-Known Member
- Thread starter
- #1
First impression is that the exhaust looks good. The majority of the welds are solid. There are a few pinholes in certain areas but overall good welds.
The slip fit connector that is welded onto the downpipe itself could be a little straighter. Ill see if that bites me in the butt later. The flange on the top that bolts to the turbo is very thick. It has a few rough edges on it buy this should not have any bearing on its installation.
The lower piece has good quality welds and exhaust hanger tacked to it. It does seem to be a very solid piece. Like i said, all of these things mean nothing if the installation is a nightmare.
The slip fit connector that is welded onto the downpipe itself could be a little straighter. Ill see if that bites me in the butt later. The flange on the top that bolts to the turbo is very thick. It has a few rough edges on it buy this should not have any bearing on its installation.
The lower piece has good quality welds and exhaust hanger tacked to it. It does seem to be a very solid piece. Like i said, all of these things mean nothing if the installation is a nightmare.
Sponsored