cj pony parts

  1. Exhaust piping question-Video Included of sound

    I just installed Borla S type axle back and Magnaflow tru x (CJPP), and it sounds absolutely amazing. I’m not happy with where my tips landed in the valance on one side. Tired every combination of supporting the piping and tightening the clamps. I think it was with where the pipe was cut. I...
  2. GT350 Like New GT350 Accessories!

    For sale are the following take offs from my 17’ Shelby GT350. All parts were on the car for less than 100 miles. The Lloyd floor mats have never been stepped on. Everything is in immaculate condition and located in Jacksonville, Florida. Buyer pays shipping. Thanks for looking! JLT Passenger...
  3. Orange Fury 2018 GT PP2 vs PP1 Comparison with Photos!

    Hey All - Thanks to the awesome folks over at Leonardtown Ford in Maryland, I had the privilege of taking an Orange Fury GT PP2 for a spin. This was a 301A car with cloth Recaros and man was it sweet! Anyways, I put together a write-up for those out there comparing and contrasting the PP2 up...
  4. Cerv14's 2015 GT PP Comp Orange Build

    Hey Guys, After documenting everything on my 2015 EcoBoost Build Thread under the name “NOTAV8,” I wanted to take this opportunity to start a new thread for the GT. For those that are wondering what happened to the EcoBoost, you can read about it in the build thread. The TL;DR of it is that it...
  5. Barton Industries Short Throw Shifter Hybrid 3 w/Reverse Lockout Collar GT

    Barton Industries Hybrid 3 Short Throw Shifter with Reverse Lockout Collar for all 2015, 2016 and 2017 GT Mustangs. Achieve quicker shifts with your 2015-2017 GT Mustang that are more accurate and decisive by upgrading your shifter to a Barton Industries Hybrid 3 Short Throw Shifter with...
  6. KONI Yellow Sport Adjustable Struts And Shocks

    KONI Yellow Sport Adjustable Struts And Shocks [ame=""] KONI Yellow Sport Adjustable Front Strut KONI Yellow Sport Adjustable Rear Shock KONI Yellow Sport Adjustable Strut and Shock Kit NOW IN STOCK!!! KONI offers 2015-2016 V6, EcoBoost and GT Mustang owners a S550 specific...
  7. NOTAV8's CO 2015 EcoBoost PP Build

    The Build Thread: Hey Guys - I wanted to start a build thread to not only give others inspiration (as some have for me) but also to keep a timeline throughout the life of this "Pumpkin". Still haven't come up with a name for her yet... A little about myself -- My name is Chris and I work in...
  8. Ruby Red Imperial Guard!

    Mustang: Premium 400A, ruby red, black accent pkg, black roof, redline recaros, 3.55 gears, 6R80 trans. Engine & Exhuast: Frankenstien Dynamics CNC ported heads Manly valves/valve springs Comp Cams custom ground cams (RPG racing engines NA spec) ARP Head studs MMR OPG/Sprocket MMR Chains MMR...
  9. Magnaflow Competition Cat-Back Quad-Tip Exhaust

    If you guys haven't heard it yet - make sure to check out the new Magnaflow Competition Cat-Back Quad-Tip Exhaust System! Please let me know if you have any questions - I'd be happy to help you out! Check out all of the details here: http://www.mustang6g.com/forums/showthread.php?p=668605 You...
  10. Magnaflow Competition Cat-Back Quad-Tip Exhaust [CJPP Exclusive!]

    We are extremely happy to announce that we've teamed up with our friends over at Magnaflow to develop the Competition Cat-Back Quad-Tip Exhaust System for 2015 GT Premium Model Fastback Mustangs! With Magnaflow, you know the build quality and exhaust note will go unmatched with this cat-back...
  11. 2015 Mustang CJ Pony Parts Lowering Spring Set Install Video

    [ame] These CJ Pony Parts Lowering Springs are for all 2015 Mustangs. We've always felt that the styling of the 2015 Mustang would look great with a set of raked springs. These springs are going to lower the front of your Mustang 1.5 inches, and the back 1 inch to give your Mustang a nice...
  12. CJ Pony Parts Lowering Spring Set 2015

    CJ Pony Parts EBS23 Mustang Lowering Spring Set of Four 2015 CJ Pony Parts is here to help you get that "raked" look for your 2015 Mustang with these lowering springs made specifically for us by a leading suspension manufacturer. These lowering springs were designed to give you an aggressive...
  13. 2015 Mustang Maximum Motorsports Caster Camber Plates Install Video

    [ame] These Maximum Motorsports Caster Camber plates are for all 2015 Mustangs. If you want to lower your 2015 Mustang properly, you're going to want to get a set of these caster camber plates. If you lower your Mustang too much, the wheels could tilt inward, causing uneven wear on your...
  14. Maximum Motorsports Caster Camber Plates 2015

    Maximum Motorsports MM6CC-10 Mustang Caster Camber Plates 2015 Lowering your 2015 Mustang will likely cause the top of your front tires to lean in towards the center of the car, resulting in negative camber, causing uneven tire wear. This can easily be correct by ordering these Caster Camber...
  15. 2015 Mustang Ford Racing Jounce Bumper And Hardware Pack Install Video

    [ame] This Jounce Bumper Kit is for the 2015 Mustang. If you're looking at lowing your 2015 Mustang, there are more parts you will want to look at besides lowering springs. The factory bump stops are designed to work around the factory springs. When you lower the car, you're more likely to...
  16. Ford Racing Jounce Bumper And Hardware Pack 2015

    Ford Racing M-5570-B Mustang Jounce Bumper & Hardware Pack '15 Improve the overall driving experience while you are cruising down the highway in your new 2015 Mustang by ordering Ford Racing's Jounce Bumper and Hardware Pack. With a unique design that provides top notch results, this kit is an...
  17. 2015 Mustang Ford Racing 1" Lowering Springs Street Install Video

    [ame] These Ford Racing Lowering Springs are for the 2015 Mustang GT. one basic bolt-on install the 2015 Mustang could benefit from is a set of lowering springs. The kit is going to lower your 2015 Mustang approximately 1" all around. For more information on this kit check this LINK
  18. Ford Racing Lowering Springs Street 1" GT 2015

    Ford Racing M-5300-X Mustang Lowering Springs Street 1" GT '15 Even when purchasing a brand new 2015 GT Mustang, the first thing most may want to do is give it a lower and more forceful stance. You'll be able to accomplish that and more by adding these Ford Racing 1" Street Lowering Springs to...
  19. 2015 Mustang Resonator Delete H-Pipe and X-Pipe Sound Clips

    [ame] Mustang Resonator Delete X-Pipe Aluminized GT 2015 Mustang Resonator Delete H-Pipe Aluminized GT 2015 We recently installed a resonator delete H-Pipe and X-Pipe on our 2015 Mustang GT. Since then, we have received a lot of requests for sound clip comparisons. So in this video, we...
  20. 2015 Mustang GT Resonator Delete X-Pipe Install Video

    [ame] This Resonator Delete X-Pipe is for the 2015 Mustang GT. An X-Pipe is going to remove the heavy factory resonator, which is going to provide more flow through the exhaust, increase horsepower, and give your Mustang a much better sound. Today, we're going to show you how to install it on...
Top