Search results

Does anyone know what kind of fittings are on the OEM 350/Mach/DH diff cooler? Referring to what would be required to connect to the in and out as they are clearly not AN. They almost look like a type of quick disconnect.

Should I be concerned about the iron and lead? With a perfect engine those should be zero, right?

I'm planning to install a pair of 2 1/6" aftermarket gauges in the standard PP gauge location. I've reviewed diagrams and planned out where I can run the wires. These will be for monitoring temps during track use. A couple questions: Should I use some wire looming / conduit once the wires exit...

I was going to wait until the spring to buy tires but this happened. Not even sure how I did it, which is mildly disturbing. I’m assuming it was a very low curb or else I’d have a lot of wheel damage I am not fast. My current ECS have 7 days on them and look like this. The W is still...

If you followed my original thread on these seats, you'll know I had a snafu with my original order that needed to be resolved. After all was said and done, I ended up with an extra seat. I'm aware the target market is small for a single seat. I will be cross-posting this between M6G and M7G...

I've reviewed @DFB5.0 's infamous Soap Shoot Out Thread and narrowed my choices down based on that. I want better soap, and I want to solve a pre-spray/pre-wash as part of that. The gloss adders in Meg's gold class are no good for ceramic. Griot's ceramic wash is too unforgiving and does not...

I've seen the threads about 18-23 Recaros swapped into 15-17 where what's needed is swapping the bladder and the OCS sensor from the 15-17 seat to the 18-23 seat. I assume this same logic can be used for FP Recaros M-63660005-MF. Does anyone know if this will work with S650 seats in a S550...

Yesterday I did my second instructed track day at NJMP lightning. I definitely improved, but I am having issues bracing myself properly for the duration of the lightbulb (turn 9, map included for those unfamiliar). I am taking the turn slower than I know I can purely because I cannot keep...

I went from a 3.31 / Trac lok to a 3.73 / Torsen. Car was originally a non-PP car equipped with 235/50R18 tires and now it has 285/35R19 tires. Not a huge difference, 1mph at 60. When I first installed the diff, the car pulled power over 3k rpm in 2nd, 3rd, and 4th gears. Did not bother trying...

I should've made a build thread last year when I really began working on it, but better late than never! I'll add more pics and links to the mod list as I build up the thread. Mods in chronological order by install date Ford Performance GT350R Strut Tower Brace Kit (M-20201-GT350) (3/5/23)...

Looking for an OEM++ style replacement/upgrade when I swap in a Torsen diff. https://www.bmrsuspension.com/?page=products&productid=1764&superpro=0 https://www.steeda.com/s550-diff-bushing-12.9-hardware-upgrade-kit.html Is the BMR the kit to go with here since it has the sleeves? Doesn't look...

$200 Front knuckle assemblies from a Non-PP 2016 Mustang GT. Includes knuckles, calipers, rotors, control arms, and ABS sensors. 25,000 miles at time of removal. Be sure to re-torque all fasteners at time of installation. Local pickup / cash only.

Asking $450 for the set. TPMS are included. Stored in my garage. Two tires have a date code of 1820, two have a date code of 2320. Tires were purchased and installed on 06/02/2023 and have 2000 miles on them. Not interested in shipping.

I've read a pile of threads about this. It seems like this is either plug and play for people or a total nightmare. Obviously, I do not want it to be a total nightmare. I want to swap the diff out to a Torsen, change the rear ratio in Forscan (if necessary) and be done. I understand that if I...

I'm referring to 760-02-02 on the ABS module xxxx #xxx. Based on what I've read: 1 = Base EB and V6 3 = GT non-PP 4 = Eco PP 7 = GT PP Does anyone know what these different values actually change?

What tools do you guys normally bring to the track? All I have so far is inflator, scissor jack, breaker bar, torque wrench, socket for wheels. I have a Home Depot tote with this stuff plus a quart of oil in it so far. As a novice I don't expect to need very much my first couple times, but...

Anyone have the Fumoto F107SX on their 15-17 GT and can post a couple pics? I'm hoping to see how it looks clearance wise at the different rotations and if the pan shape blocks it from rotating at all. Thanks!

Last year when I got my new wheels I put Gtechniq C5 on them before putting them on the car. Wheels look great, coating holds up great. I was considering putting it on my new brake calipers before installing them. Gtechniq says it's good for wheels, calipers, or exhaust tips. Has anyone...

Hey guys, I'm basically a track noob looking to change all his fluids before going out. I am ok paying for premium fluids if they are actually higher quality. For brake fluid I landed on Castrol SRF, a bit pricey but guaranteed to last me a season. My concerns are with Transmission and Rear...

Hey guys, I'm going to be swapping in a PP rad and the support braces, but not sure what else I need to install the braces. Do I need four Hinge Nuts (W716409-S442), is there something else, or is everything already there? Looking at the drawing here...