Search results

3M tape

I'm fairly certain I plugged everything in and installed the clock spring correctly.

I had to replace the wheel airbag after an accident- everything is fine but now the controls won't work. Where should I start looking/checking first?

Tried that and got in, still nothing. Tried my portable battery jumper and still nothing. Got a new battery and it worked. :beer:

Went to unlock my car and got no response. Tried the 2nd key fob and got nothing. The lights don't blink on either key fob's too. So now I'm stuck. Haven't bought a new key fob battery yet. But coinendence both key fob batteries died at the same time? Car battery dead? What else could it be?

Yeah I had a hard time finding it too. I think this is it. Found in the tsb pdf.

Anyone know what the part number is for the 2 bolts with the gaskets under the cowl? The factory gasket look weird and not too confident on the rtv.

Anyone know what the part number is for the 2 bolts with the gaskets under the cowl? The factory gasket look weird and not too confident on the rtv.

It's in! Hard part is done at least. :beer:

Haha I definitely will! Going to try to get it back together later today. The jam nuts were a 25mm. I had a 24 and 27 wrench so I just guessed what the size was.

Definitely forgot to unclip some things while removing the dash lol, buts it's out. Thanks again everyone! Hopefully I remember where everything goes...

Yeah I did. Thanks for the tips! Thanks! I was able to grab some pics real quick from a friend that has alldata. Yeah I didn't realize the cluster and stuff didn't need to come out until after lol but I'm swapping dashes so they have to come out anyways. Since the first pic: I pulled the...

I need to remove the cable, but stuck on getting it unclipped. Didn't want to pry too much and break something.

Thank you!! Which are the other 4 bolts in the door jam besides the ones in the pictures above? Only;y others I see are the door hinges. Does the whole shifter have to be removed? 4 bolts on top and the cable on bottom? It’s a auto car. Remove the upper half of the steering column too...

So I think I got all the bolts and clips off the dash, but it still wont budge. The only things I haven't taken off yet are the side bolts that connect to the metal bar that runs behind the dash. Do those bolts need to be removed (pictured below)? I didn't think the whole metal bar comes out...

So I think I got all the bolts and clips off the dash, but it still wont budge. The only things I haven't taken off yet are the side bolts that connect to the metal bar that runs behind the dash. Do those bolts need to be removed (pictured below)? I didn't think the whole metal bar comes out...

Would appreciate any advice

Yup- check this out

I purchased and replaced all the airbags that deployed, luckily there was no structural damage. Got a new steering wheel bag, the bumper was scrapes/scratches and I just decided to buy a brand new OEM one from Ford. There was some warning on the screen saying the bags deployed. Will this still...

Damn, I may get them for my non drag wheels than. Awesome.