Search results

Stupid question. Once my nitto 555 r2's are down to the wear bar, do they effectively become slicks? I have probably 1-2k km left on the tires and normally do a couple 1/4 mile runs. If I burn out down to the wear bar are they just effectively slicks a safe to run the 1/4 mile with?

Hi everyone, My 2018 5.0 is 7 years old no with 35k kms / 22k miles. It only gets driven 3-5k km / 2-3k miles a year mostly. It has kooks catted headers, corsa extreme exhaust and is tuned by Wengerd Performance. I have an intake coming and will do a tune revision this summer. It is on 17"...

Used for 1.5 summers, paint matched at local ford dealership shop that performs their paint warranty work. In great condition, paint swirls from washes. Reason for selling is that I am going a different direction with the vehicles build and don't need the extra engine space. Paid just over...

Hi everyone, I have been scouring youtube for a video for someone reviewing a steeda stop the hop kit with before and after 1/4 mile times. I did manage to find one with a BMR kit. The uploader used draggy and a 1/8th mile for results. It seemed positive with a .27 second increase which seems...

2018 10r80 5.0 pp1 Currently running nitto555r2's (305/45/17 on VMS 17x10) in the rear with my regular firehawk indy 500's up top on stock pp1 wheels. Going to switch my fronts to VMS 18x9.5 in the front. Trying to shave .15 seconds + off my PB time (12.148) to hit 11's. Is the front tire...

Using the TDN app on my iphone. Both iphone and app are up to date. Every time to try to sync tunes, data log, or basically have the app do something it just immediately forces closes/crashes. Anyone have similar experiences or solution? I posted in the HP tuner / TDN forum, no replies yet...

Hi everyone, I am looking to get some lighter front wheels than the stock pp1 (2018) wheels that I am running. This year at the 1/4 mile my best time was: 1.865 60 foot 12.148 ET 113.35 MPH Burnout, peddle break in feather throttle 1,500-1,700 ish RPM, drag mode. Car is 2018 5.0 PP1 with...

Heading back to the strip tomorrow. Trying to beat 12.4003 from last year with anew 91 oct tune and kooks catted headers. From what I have gathered Drag mode, shifter in "D" when the car goes into the Drag mode I notice the traction control goes off, do I toggle it again to get Advanced...

Hi everyone, Corsa recently sent me (under warranty) new exhaust tips for my '18 5.0 as the ones that came with the xtreme active exhaust were rattling. It became more apparent when I installed kooks headers. I am getting ready to install the replacement tips. I searched youtube and I couldn't...

Dealing with the tick for a while. 2018 pp1 10r80 5.0 22k miles / 31k kms summer driven only and 1-2 quarter mile days a year. took decibel reading of warm engine before and after cera tec added 150ml. Cera tec instructions call for 600ml based on 10 liters of oil. currently running PUP 5w...

Hi everyone, 2018 PP1 5.0 10r80 with ~20k miles / 31k kms of use. Oil cap is 5w 20 and manual says 5w 30 for track days. Since I drive it so little and normally when I do I have fun and do 1-2 quarter mile track days a year I went ahead and just use 5w 30 right off the bat this year for the...

Can anyone ID this sound from engine bay Engine is warm after 15 min drive. Every year when I take it out I get freaked out by the coyote tick. Is this just the famous type writer tick, or just normal DI injectors? 2018 pp1 5.0 21k miles. Ran 5w-20 all its life, manual says can run 5w-30 if...

Hi everyone, I've had steeda low profile jacking rails for a bit now but cannot find a good way to place jack stands on them? For those that have them installed how do you place them? The jackings rails are not 100% parallel with the ground and are slightly angled upwards towards the...

Hi everyone, 2018 5.0 PP1 and my warranty is done so I will going with wengerd performance this spring for a tune. My only mechanical mod currently is a Corsa xtreme active exhust. I have kooks catted headers ready to be installed. My question is when is the right time to load the tune. The...

I am looking for rear springs that will help with my 1/4 time but also give me a visually pleasant drop to clean up the wheel gap. 2018 pp1 5.0 I am running VMS 17x10 wheels with 305/45/17 tire in the rear, stock pp1 wheels up front. Does anyone have any suggestions of a spring that will...

Hi everyone, I want to double check these will fit my platform with no additional parts before I pull the trigger for the sale. I have 2018 5.0 PP1 with a corsa extreme active exhaust. I want to keep a catted set up. I am wanting to purchase these this week. Just looking for confirmation that...

Hi everyone, I am running a 2018 pp1 5.0 on stock suspension. I do have 17x10 VMW wheels wrapped in nitto 555r2's in 305/45/17. I want to reduce my weight transfer to increase my 1/4 mile time. anyone with a similar set up running springs? I was thinking about these: Steeda 555 8210 Mustang...

Hi everyone, I've owned my 2019 GT since 2018 and wanted to wait for the warranty to expire before I tuned. I understand the basics of tuning and used to run a Ford Focus ST fullbolt ons, big turbo etc. On the ST I used to COBB Access port which was a dream to work with. I know the N gauge...

Car is located in Canada, 20 minutes from the Port Huron, Michigan land border. 2018 5.0 Premium PP1 shadow black with factory matte black stripes with red pin stripe. 18,700 Miles / 30,500 KM Red leather interior 10r80 transmission Full synthetic oil change every 3k mile / 5,000 kms Stored...

Hi everyone, I have a 2018 5.0 PP1 A10 In 2021 I ran the car bone stock with stock tires. My best time was a 12.6 with heating up the stock tires, cant remember trap. In 2022 I had a corse active exhaust and I replaced the tires with Firestone firehawk Indy 500's in the same tire size...