What did you do to your S550 Mustang today?!

[UserName]

The ride got a complete set of new tires for the first time in 30k miles. The stock pirellis for some strange reason, never quite wore out the same front vs rear. Well, it finally happened so I have switched out to Nitto 555 G2s and am liking them so far.

Sponsored

 

[GT Pony]

The ride got a complete set of new tires for the first time in 30k miles. The stock pirellis for some strange reason, never quite wore out the same front vs rear.

How often were they rotated?

 

[GT450]

Fitted my Bilsteins, very happy.

 

[Nagare]

Changed my air filter, kinda forgot about it until now and boy was it dirty in there. Bit of a pain seeing under there to get the new one back in, but still a quick job.

 

[UserName]

Every time he did a burnout

I never smoked the tires or performed any burnouts or smoke shows. I only left parallel lines on on-ramps at speeds greater than 50.

How often were they rotated?

Unfortunately can’t rotate the Performance Pack tires since they are a staggered setup.

 

[RangersGT]

Today I put on the drivers side stripes. Tomorrow I will try to do the passenger and finish up this project.

 

[ice445]

Today I put on the drivers side stripes. Tomorrow I will try to do the passenger and finish up this project.

What wheels are those? Car looks amazing in general

 

[RangersGT]

What wheels are those? Car looks amazing in general

The wheels are SVE R350s. Thanks!

 

[Mastodon2k]

I installed my Big Worm Graphix stipekit.
Although that was yesterday, not today, but it’s still close enough for government work. Now I just need to take some better pictures of it, not in my garage.

Gloss black and silver metallic

 

[shogun32]

Finally got my car back with Steeda 200/800 springs and pro-Active shocks. Not bad, but not great either. Front needs more rebound but alas it's not adjustable.

 

[dn1984]

installed the green filter in my car today. wanted to try something different than my AFE dry

 

[kiksbutt]

Tinted side marker on headlights

 

[Mootang]

Been awhile, but I am almost finished with my Frankenstein of a return fuel setup. Began with a used Rodeheavers fuel system, VMP fuel rails, Innovate Motorsports ethanol sensor, bunch of fittings from Amazon, Jiffy-Tite, and Fore Innovations. A friend suggested to use the stock feed line as my return line. So I did and added a fuel filter on the new feed line.

Found my EVAP leak while I was at it

Added a fuel drain plug for swapping tunes

Tight tolerances

 

[GTP]

I installed my Big Worm Graphix stipekit.
Although that was yesterday, not today, but it’s still close enough for government work. Now I just need to take some better pictures of it, not in my garage.

Gloss black and silver metallic

@Mastodon2k did you install the stripes dry or with spray water?
Did you find the hood stripes difficult? Any tips for the hood?

 

[Tukman]

Did a little cleaning, new license plate frames and ready for the road.

Sponsored