If the stock system was a little more straight, we could put any tips on. As it is I'm already over $300 and I don't have a solution. Any more money and I should have just bought an axle back magnaflow
I know what you mean. Only reason I haven't done an axle back is they don't seem to retain much of a tone difference from track and normal. And quiet isn't quiet anymore lol
Truth be told, I really like the factory sound. The differences between the modes are perfect... JUST NEED TIPS!
I'm in the same exact boat. Once I added headers, I ruined the sound and then put a race muffler on each bank. It's a perfect balance.
Ok, had n idea. Currently doing headers and a bunch of stuff. But tip wise. I bought off eBay some 12” long x 4” round slash cut rolled edge tips. Chopped em to 6” long from the top for the inside tips and 6.5” for the putter tips. For attaching them. I am gonna tig inside where the tip goes into the rolled edge and then either the top, side or bottom atleast an inch long. I don’t believe in bolting tips on. I will probably scuff them in advance as I plan to paint them black and the stainless will discolor where the tip is on the end. Thoughts?
I like it.Ok, had n idea. Currently doing headers and a bunch of stuff. But tip wise. I bought off eBay some 12” long x 4” round slash cut rolled edge tips. Chopped em to 6” long from the top for the inside tips and 6.5” for the putter tips. For attaching them. I am gonna tig inside where the tip goes into the rolled edge and then either the top, side or bottom atleast an inch long. I don’t believe in bolting tips on. I will probably scuff them in advance as I plan to paint them black and the stainless will discolor where the tip is on the end. Thoughts?
https://www.ebay.com/itm/263863936088
The tips I bought. Keep ya posted with more pics to come.
this is a fantastic idea. instead of the 2 fake tips we were originally trying to do!Ok, had n idea. Currently doing headers and a bunch of stuff. But tip wise. I bought off eBay some 12” long x 4” round slash cut rolled edge tips. Chopped em to 6” long from the top for the inside tips and 6.5” for the putter tips. For attaching them. I am gonna tig inside where the tip goes into the rolled edge and then either the top, side or bottom atleast an inch long. I don’t believe in bolting tips on. I will probably scuff them in advance as I plan to paint them black and the stainless will discolor where the tip is on the end. Thoughts?
https://www.ebay.com/itm/263863936088
The tips I bought. Keep ya posted with more pics to come.
oh don’t worry. I have them other damn tips too. But they wouldn’t go on far enough for my liking. As for double wall I dunno. Maybe. I used and abrasive chop saw and then de-burred them with pliers and a dremel tool. Grabbed some satin Blk paint for em today. Should have em almost done tomorrow. Minus paint. Finished longtube install today after they arrived. So was busy with that. I’ll post pics before paint. Already scuffed the tips for the paint to stick to em.
cant wait to see it man! i been busy with cold air intake, blacked out emblems, eibach pro kit, black mirror caps, and working on changing out the orange spoiler to a black spoiler...just need some damn exhaust tips!!!!
Man really looks perfect. No more sticking out! Great job! I'm going to do this nowOk. Tips are on. And pics before painting them black as promised. I think it’s gonna be perfect
Scuffed looks nice!