Procharger belt question

[horsepower addiction]

Take some rope and run it around the pulleys like the belt. Have someone hold the tensioner then mark the rope. Take the rope out lay it straight and measure it

Sponsored

 

[Medusa5oh]

That really makes me think this belt is too short then if you have smaller pulleys and your belt is longer than the one supplied. Sounds like it’s not even a little too short it’s way too short for oem components just going off that comparison. I’ll try to the rope trick just out of curiosity

 

[wingnutt]

For what it’s worth…ProCharger sent me a belt too big, and I was having a devil of a time keeping it on the pullies.

wait until you can call them

 

[BullittBoy]

Take some rope and run it around the pulleys like the belt. Have someone hold the tensioner then mark the rope. Take the rope out lay it straight and measure it

I would do this and see if it matches what Procharger tells you. Make sure you pull the string tight and you use the same "rib channel" on all drive pulleys to get the absolute correct measurement.

Sponsored