What did you do to your Mach 1 today

[Tinpot]

I bought a set of LMR SVE 15-18 Shelby GT350 reproduction wheels. 19x10” fronts and 19x11” rears . LMR won’t ship to the UK so they had to come via a trans shipper. This took a while but the trans shipper - STS Imports - made the process very easy. I thought finding suitable tyres was also going to be easy but that’s turning out to be another challenge.

Sponsored

 

[Coastal-Mach]

Did the annual oil change, sent an oil sample to Blackstone, and verified the Oil-Udder does not work with our cars. Still an oily mess. Good news, the UPR oil drain valve worked like a champ.

Reference below of the Oil-Udder, I will use it on other applications.

 

[ViperOne]

Did the annual oil change, sent an oil sample to Blackstone, and verified the Oil-Udder does not work with our cars. Still an oily mess. Good news, the UPR oil drain valve worked like a champ.

Reference below of the Oil-Udder, I will use it on other applications.

Thanks I almost bought the udder! Where did you buy the UPR drain valve?
I recently had Ford do an oil change. Made a mess and didn’t clean up. Smoke and oil dripping. Took it back and the service manager dropped the bottom cover and cleaned it up. Got to be an easier method to reduce mess…I hope. I’m planning on doing my own oil changes.

Did the annual oil change, sent an oil sample to Blackstone, and verified the Oil-Udder does not work with our cars. Still an oily mess. Good news, the UPR oil drain valve worked like a champ.

Reference below of the Oil-Udder, I will use it on other applications.

 

[Coastal-Mach]

Thanks I almost bought the udder! Where did you buy the UPR drain valve?
I recently had Ford do an oil change. Made a mess and didn’t clean up. Smoke and oil dripping. Took it back and the service manager dropped the bottom cover and cleaned it up. Got to be an easier method to reduce mess…I hope. I’m planning on doing my own oil changes.

Anytime, I think I actually ordered it from Amazon. Here is the one I have, in the link below:

https://www.mustang6g.com/forums/threads/what-did-you-do-to-your-mach-1-today.171200/post-3879995

 

[skinnyb]

Thanks I almost bought the udder! Where did you buy the UPR drain valve?
I recently had Ford do an oil change. Made a mess and didn’t clean up. Smoke and oil dripping. Took it back and the service manager dropped the bottom cover and cleaned it up. Got to be an easier method to reduce mess…I hope. I’m planning on doing my own oil changes.

I have some leftover pee pads from when I had my pup. I run one up in the area around and under my filter. It catches the spillage and soaks it up. and I make sure the tail is down below the trap door so any that doesn't get soaked up runs into the pan. Works pretty well, I have the really large absorbent ones...

 

[IanKar]

Anytime, I think I actually ordered it from Amazon. Here is the one I have, in the link below:

https://www.mustang6g.com/forums/threads/what-did-you-do-to-your-mach-1-today.171200/post-3879995

I do all the brake, wheel bearing etc work myself but haven't tried the oil change yet even though I got me a udder. As predicted and based off your experience, it would be a mess. So I think I'll still use the 'shops' for the oil changes. Thanks for the post confirming the udder not being suitable.

 

[Coastal-Mach]

I do all the brake, wheel bearing etc work myself but haven't tried the oil change yet even though I got me a udder. As predicted and based off your experience, it would be a mess. So I think I'll still use the 'shops' for the oil changes. Thanks for the post confirming the udder not being suitable.

Hey Ian,
I hope you and your family are doing well, let’s catch up soon!

 

[IanKar]

Hey Ian,
I hope you and your family are doing well, let’s catch up soon!

Thanks Anthony. All good. Yes we must...

 

[wingnutt]

lol, wut?

y’all don’t use the formafunnel for oil changes?

https://formafunnel.com/

 

[Coastal-Mach]

lol, wut?

y’all don’t use the formafunnel for oil changes?

https://formafunnel.com/

I will check that out, thank you Sir!

 

[skinnyb]

Had a great day today. Did a birthday drive by cruise for a little boy who is a HUGE Mustang fan. Got a pic with him and his big brother. Also had @Boyd along for the event so had to take a selfie Was an awesome day

 

[Boyd]

Nice pano pic of the cars that participated in the birthday drive-by for the little boy mentioned in @skinnyb 's post above.

And of course, the 2 representing Mach 1's.

 

[skinnyb]

Nice pano pic of the cars that participated in the birthday drive-by for the little boy mentioned in @skinnyb 's post above.

And of course, the 2 representing Mach 1's.

Yessir, had a great time. And we had one New Edge Mach 1 too Man I love that car

 

[skinnyb]

Out and about again today before rain hits tonight. Stopped at a replica Sinclair station close by for a few pics. Pretty cool place

 

[Prodigal]

Final bath, plug in the trickle charger and put her to bed for a long sleep. See you in April!

Sponsored