What did you do to your Mach 1 today

[ViperOne]

Laid down some contrast on the hood today. It's just a tad crooked but not really noticeable unless you stare at it for a few minutes. It gives the Mach 1 name quite a pop that I like. Got the whole kit to do the fender badges and deck lid badge too but I'm on the fence about those. Hardest part was polishing off the ceramic coating in that area and cleaning it so it would stick good

Looks good. Where did you get the kit?

Sponsored

 

[skinnyb]

Looks good. Where did you get the kit?

Got them here. Really well made.

https://zurkdecals.myshopify.com/

 

[skinnyb]

Also added the rear fender spats today. It's amazing the little things make a huge difference.. Got them from Levittown Ford online. Jacked up and removed the tire to be able to have room to work as I'm a big dude.

 

[gsxr1300]

looking good! I need to install mine along with jacking rails.

 

[ViperOne]

Got them here. Really well made.

https://zurkdecals.myshopify.com/

Looks good and thanks for the sharing the vendor! Did you do the fog light overlay as well?

 

[skinnyb]

Looks good and thanks for the sharing the vendor! Did you do the fog light overlay as well?

I bought them but messed one of them up installing the passenger one. So I paused for now. They are well made but a bit tricky to get on and not wrinkle up. That was my issue with that one. It puckered and wrinkled and I kinked it up. Totally my inexperience in these kinds of things.

 

[ViperOne]

I bought them but messed one of them up installing the passenger one. So I paused for now. They are well made but a bit tricky to get on and not wrinkle up. That was my issue with that one. It puckered and wrinkled and I kinked it up. Totally my inexperience in these kinds of things.

I’m on the fence with the dog light

I bought them but messed one of them up installing the passenger one. So I paused for now. They are well made but a bit tricky to get on and not wrinkle up. That was my issue with that one. It puckered and wrinkled and I kinked it up. Totally my inexperience in these kinds of things.

I’m on the fence with the fog lights. I may wait to see if others do it so I can see how they look. I’m not unhappy at all with stock appearance. Did you get details on installation from the vendor?

 

[skinnyb]

I’m on the fence with the dog light

I’m on the fence with the fog lights. I may wait to see if others do it so I can see how they look. I’m not unhappy at all with stock appearance. Did you get details on installation from the vendor?

I did. And followed. Obviously I didn't get it quite right lol... This is the stock photo they have. I'm kinda on the fence about it too.

 

[gsxr1300]

Had fog lights installed.

 

[The Demon]

Had fog lights installed.

More details please. did you do it yourself or was it a shop and where did the lights come from?

 

[skinnyb]

Removed some really crappy PPF from the rear bumper, and the rear stripes. They were crooked (Stripes) and my OCD was driving me batty... Plus the PPF was installed over it ... Don't know why in the world anybody would do that.... Front PPF removal tomorrow. It is a really crappy install job too and it looks like $#!+... Bought myself a heat gun a couple weeks ago and it made short work of it, just a little heat and some pressure and it peeled off like butter. Very little adhesive to remove, just a couple small spots on the corners...

 

[IPOGT]

I originally got mine for my PP GT but I did swap over to my Mach 1. My Mach 1 is actually not a HP car, but dressed to look like one (has the HP wheels with HP sizes), but I don't anticipate having to use much and if I do, won't be for very long or very far... I did use Forscan to go in and reprogram the BCM to the correct tire size...

If it didn’t have the HP option before, it does now.

 

[skinnyb]

looking good! I need to install mine along with jacking rails.

Jacking rails were installed on mine the first week had them on my GT and loved them.

 

[Scott058]

Swapped out the brake lines, pads and rotors today. I’m happy with the outcome. Only setback was me not reading the instructions.

 

[gsxr1300]

More details please. did you do it yourself or was it a shop and where did the lights come from?

https://www.facebook.com/marketplace/item/1053976009472353/?mibextid=dXMIcH

Local guy sells this kit. I had him do the install.

Sponsored