What did you do to your S550 Mustang today?!

[JohnnyGT]

J&M SS lines, "custom" painted Brembos, gloss black painted rear calipers, new rotors and Hawk HPS pads all around.

Thought I had all the air out, but there's some mushiness in the pedal. I need to bleed them again. I was able to bed in the pads at least.

Big thanks to @shogun32 for parting with the front hardware and some rear calipers so I could paint everything off the car.

Sponsored

 

[JohnnyGT]

Also put the the old wheels back on. Man is it a night and day difference between the Nittos and Indys. Just a short ~2mi loop through the neighborhood and some highway.

Time to fix the air in the lines, properly inflate the tires, give it a long overdue wash, then send it!

 

[DFB5.0]

Rain delay………

Oh, so I'm not the only nut job who washes his car rain, hail or shine?

 

[DFB5.0]

Yesterday - Changed the cabin filter on the daily …

WD

And I thought this one was bad from my XR6...............

 

[WD Pro]

Just done mum and dads too. Looked similar to mine, maybe not quite as bad dust and small debris wise, but it had gathered a big pile of twigs and leaves under it that looked just a little nest like ! (Cabin filter is under the hood on their car).

In both cases, the back of the filters were perfectly clean

WD

 

[Justpassingas]

Oh, so I'm not the only nut job who washes his car rain, hail or shine?

I do it all the time and I call it a hillbilly carwash

 

[HoosierDaddy]

Oh, so I'm not the only nut job who washes his car rain, hail or shine?

I do. But rain rare in my part of Arizona. So had to drive to Michigan for rain wash/rinse.

 

[TrackMustang]

Don't you have the same thing on order?

I haven’t ordered it yet, but yes, I will have it soon….

 

[rxryanm]

Got my car wrapped and picked it up from the installer earlier this week. Also got the valve stems on my drag wheels swapped over to metal as to be compliant (no pics of that tho).

 

[Bikeman315]

Got my car wrapped and picked it up from the installer earlier this week. Also got the valve stems on my drag wheels swapped over to metal as to be compliant (no pics of that tho).

That is freakin’ insane. I love it.

 

[KingKona]

J&M SS lines, "custom" painted Brembos, gloss black painted rear calipers, new rotors and Hawk HPS pads all around.

Thought I had all the air out, but there's some mushiness in the pedal. I need to bleed them again. I was able to bed in the pads at least.

Big thanks to @shogun32 for parting with the front hardware and some rear calipers so I could paint everything off the car.

I really need to do that with my rear calipers. POR15?

 

[fmc_smt]

Went to a cc a few miles away , met up with @Redfuzzbutt . Small turn out , but a bunch of cool guys . Made it home , and then this lol .

 

[Dan243]

Washed my father in laws gen 5

 

[gtcs20148]

Cars and Cigars at Loudon Station

 

[NFG19]

Washed my father in laws gen 5

I do miss my 13GT! Been thinking really hard about getting a 13boss! What do y’all think on the collectibility of those?

Sponsored