Sponsored

Mach 1 Rear-wheel lip molding part number

ChitownStang

Well-Known Member
Joined
Mar 9, 2015
Threads
72
Messages
2,787
Reaction score
3,244
Location
Chicago, North Shore
Vehicle(s)
2021 Mach 1
Vehicle Showcase
1
I just completed installation of the rears on my non-HP Mach 1. Took about 20 minutes per side. Jacked up one side of the rear to get additional clearance. Popped the three plastic retainers that hold the wheel well liner and moved it out of the way. Removed two existing screws that hold side of bumper. Installed two screw clips into existing holes, located molding pin into existing hole, replaced original screws plus two new ones, replaced liner into original position, reinstalled original three plastic retainers plus one new one. Only tools used were small screwdriver and 1/4" ratchet with short extension and socket.
Hey melwff,
Did you buy the hardware separately? Looks like I can get the left and right rear for Taska for $106 but not sure if hardware is included.
 

melwff

Well-Known Member
Joined
Oct 4, 2016
Threads
6
Messages
883
Reaction score
299
Location
Danbury,CT
Vehicle(s)
2021 Mach 1 M2486
Hey melwff,
Did you buy the hardware separately? Looks like I can get the left and right rear for Taska for $106 but not sure if hardware is included.
They do not come with hardware.
 

ChitownStang

Well-Known Member
Joined
Mar 9, 2015
Threads
72
Messages
2,787
Reaction score
3,244
Location
Chicago, North Shore
Vehicle(s)
2021 Mach 1
Vehicle Showcase
1

Charlemagne

Well-Known Member
Joined
Jan 14, 2021
Threads
1
Messages
1,752
Reaction score
2,954
Location
Czech Republic (Europe)
First Name
Nick
Vehicle(s)
Tempest 2021 Mustang Mach 1 Velocity Blue M3440
Vehicle Showcase
1

Sponsored

ChitownStang

Well-Known Member
Joined
Mar 9, 2015
Threads
72
Messages
2,787
Reaction score
3,244
Location
Chicago, North Shore
Vehicle(s)
2021 Mach 1
Vehicle Showcase
1
haha, thanks guys. With my new aftermarket RTR wheels the 275's seem to stick out further so these will work nicely!
 

ChitownStang

Well-Known Member
Joined
Mar 9, 2015
Threads
72
Messages
2,787
Reaction score
3,244
Location
Chicago, North Shore
Vehicle(s)
2021 Mach 1
Vehicle Showcase
1
I had a feeling that would be your follow up question.
W716195-S450B screw for 4
W714205-S307 nut for 4
W714040-S300 pin for 2
One more stupid question, do I need 2 of each of those hardware part #'s for both sides?
 

ChitownStang

Well-Known Member
Joined
Mar 9, 2015
Threads
72
Messages
2,787
Reaction score
3,244
Location
Chicago, North Shore
Vehicle(s)
2021 Mach 1
Vehicle Showcase
1
Also looks like the spreadsheet show part # for the screws starts with 715 and your screw shows 716
No that covers both sides, you saw the quantity I listed for each?
Yes, got it... sorry, its a Friday...lol
 

Sponsored

ChitownStang

Well-Known Member
Joined
Mar 9, 2015
Threads
72
Messages
2,787
Reaction score
3,244
Location
Chicago, North Shore
Vehicle(s)
2021 Mach 1
Vehicle Showcase
1
So which screw is correct?
Side bracket retainer screw - W716195-S450B or
wheel opening molding screw- W715195-S450B ( this is in the spreadsheet and seems like it is for that area of the car)
 

ChitownStang

Well-Known Member
Joined
Mar 9, 2015
Threads
72
Messages
2,787
Reaction score
3,244
Location
Chicago, North Shore
Vehicle(s)
2021 Mach 1
Vehicle Showcase
1

melwff

Well-Known Member
Joined
Oct 4, 2016
Threads
6
Messages
883
Reaction score
299
Location
Danbury,CT
Vehicle(s)
2021 Mach 1 M2486
Also looks like the spreadsheet show part # for the screws starts with 715 and your screw shows 716

Yes, got it... sorry, its a Friday...lol
It is 716, took it directly from the invoice and the link in this thread for Levittown also shows 716.
 

melwff

Well-Known Member
Joined
Oct 4, 2016
Threads
6
Messages
883
Reaction score
299
Location
Danbury,CT
Vehicle(s)
2021 Mach 1 M2486
Also, the splash guards in the spread sheet are the GT500 ones which are different from the ones melwff is showing
Where in this thread did I show the full number?
I just looked at the Mach 1 tab and GT500 tab, they are the same on the spreadsheet and it looked correct.
 
Last edited:

melwff

Well-Known Member
Joined
Oct 4, 2016
Threads
6
Messages
883
Reaction score
299
Location
Danbury,CT
Vehicle(s)
2021 Mach 1 M2486
A picture is worth ........
Sometimes there is a reason not to throw out the box.

20220107_165412.jpg
Sponsored

 
 




Top