What did you do to your S550 Mustang today?!

[GT Pony]

In my book this falls under the category of "very unlikely to matter". Tire shops and dealers have been raw dogging the hell out of lug nuts and studs with their impacts for years now. There's no way manufacturers don't know this by now, so there's likely quite a bit of margin with the factory setups. So your 10% inaccuracy reading from greased threads isn't likely to matter.

I've seen snapped off lug nuts studs because the threads were lubricated and torqued to factory specs. Not a good idea to lube lug studs.

Sponsored

 

[Bandi]

Has anyone gone with two piece rotors? Even if you haven’t, what’s your opinion on them?

Thinking about getting away from the stock rotors but have heard that it’s best to just go with a better pad over anything else.

 

[FreePenguin]

I lost my car play somehow. Da fuq

I am on 3.0 with auto updates off, it’s been the same for 2 years. Just now my whole display changed. I have a Pandora etc, but I lost carplay. The Pandora stuff has its own icons and such outside of the carplay normal looking sthff
.
I don’t like it
My iPhone is 14.2 iOS

 

[groove93]

Is there a newer version of the Sync Software available? My Mustang is a 2019 Model year. I was just looking around in the settings between Android Auto and Sync on the touch screen, and noticed that the last update was from February 2019. The display says it's version 3, and when I attempted an update, a screen with a circular status bar appeared and did not progress anywhere. I just turned everything off as I was not that concerned.

 

[m3incorp]

You don't want to update from wifi. Log onto Ford and download updates to usb if available for your car.

Is there a newer version of the Sync Software available? My Mustang is a 2019 Model year. I was just looking around in the settings between Android Auto and Sync on the touch screen, and noticed that the last update was from February 2019. The display says it's version 3, and when I attempted an update, a screen with a circular status bar appeared and did not progress anywhere. I just turned everything off as I was not that concerned.

 

[FreePenguin]

I stopped. Deleted iPhone/all phones out of the car settings, turned phone and car off and repaired carplay.

working now. But weird as hell that happened.I won’t update from 3.0 there isn’t a further update but if it did get updated to3.4 it would remove the ford performanceford gt themes. Which is so much nicer on the eyes imo

 

[kiksbutt]

I did a minor mod to the steering wheel (white pony) to match the shifter knob and white leather stitching. Also added some carbon fiber vinyl to cover the bland oem bezels.

 

[Crayon]

I decided to remove the red front and rear pin stripes from the splitter and the rear valance. I'm keeping the red in the interior though.

 

[Deleted member 35775]

i took advantage of a generous offer and sold it to Vroom. i have my eyes on a dealer demo 2020, fully loaded GT350 (9K miles) and a 2021 Mach 1 HP.

 

[Geosh]

Ditched the ugly and ridiculously narrow stock base wheels for some new meats

American Racing AR924 20x9 +35 with 275/35/20 Firestone Indy 500s and 20x10.5 +45 with 305/35/20
I just threw them on and took a test drive so please excuse them not being cleaned up.

Now I have to decide if I want to lower it at all, maybe just the front? and what color to paint the calipers. Red is a possibility but I'm leaning towards blue

Red looks good IMO

 

[m3incorp]

Vroom is buying a lot of nice cars.

 

[groove93]

Upgraded Sync to version 3.4. Rather than have the car sit idling in the parking lot while the system updated, I decided to drive home. Since it's an hour drive, that gave the system enough time to update.

The update took about 25 minutes, but I was required to park the car and engage the Emergency brake for Android Auto to connect. Rather than stop at some random place, I drove to a gas station near home, refueled, then configured Android Auto.

The process was very seamless for me.

 

[DrZed]

Hi Voodoo. I recently installed the older style White Madness shifter like yours. I was a little concerned that mine has a slight amount of side to side play in the ball which I didn't see the need for. Is this the same for yours or could mine be faulty.

Hold up... right hand drive but the hood release is on the passenger side for you????

 

[Joe B.]

Changed the FOB batteries for the first time because of an alert, and all I can say is, it sure seems like an awkward. chintzy, snap together design.

 

[wireeater]

Picked up a DJI mini 2 kit earlier. Hope to get some decent videos with the exhaust changes. Still figuring out if I'm going to SVT SuperFest this weekend at VIR.

Sponsored