Sponsored

Convertibles Photos Thread

Keithfro

Well-Known Member
Joined
May 19, 2020
Threads
6
Messages
196
Reaction score
562
Location
Denver CO
First Name
Keith
Vehicle(s)
2019 Mustang GT Convertible
Vehicle Showcase
1

Sponsored

Virnman

Well-Known Member
Joined
Aug 21, 2020
Threads
0
Messages
242
Reaction score
666
Location
San Tan Valley, AZ
First Name
Chris
Vehicle(s)
Oxford White 2019 GT Premium Vert 401A A10
Vehicle Showcase
1
DIY’d vinyl wrap on my hood, side views and gas tank cover today. Also put on the white tire lettering on my new Michelins.

5969BB9F-D932-408A-8CA5-68409076A994.jpeg


23921660-EC2A-4793-A3AB-63833D203BC7.jpeg


9B8BFA9E-6F82-41D1-9F03-C7E66768FB31.jpeg


F81A88A4-C820-4A5F-A379-EBDB07F4BBAC.jpeg


10B82945-298D-45E7-8F1E-E1F5DF347C80.jpeg
Sweet ride! I am still running the stock minuscule trunk lip. What trunk spoiler is that? Thanks.
 

Sponsored

dvalera001

Active Member
Joined
May 12, 2019
Threads
2
Messages
37
Reaction score
58
Location
Miami
First Name
Daniel
Vehicle(s)
2019 Mustang GT Premium
Installed and ready to roll.

77A5AB8F-8390-4003-8878-38F196E9CC8C.jpeg
1A7CF4E7-C53B-41A0-839A-1B9ABF945F5A.jpeg
7AF0F20A-8ACB-4D41-BEDB-3CCE34C3AC60.jpeg
0D83BCAA-956C-4866-9242-3C8C4E6444CA.jpeg
BC2D11D9-4E1E-403E-8D80-C7E7F6EB26D3.jpeg
DF6513BA-89C0-471B-BE55-36F89D1E2101.jpeg
99B267E0-28CA-4B59-84E0-71D0B95B328D.jpeg
778D7E1C-9A75-49CE-A290-F9F175B4F56E.jpeg


This includes the lower high flow grill.

Oh and I tried to adjust the hood by myself but made it worse 🤦‍♂️
The hood just looks a little too far forward. Should be an easy fix.

Measure the corner of the hood at the point that it should line up with the tip of the fender. Open the hood and put some painters tape on the hood strut and hood, and mark the current position. Make a slit in the tape to separate the piece on the strut from the piece on the hood, cuz you’re gonna need to shift it. Then mark the distance that you measured from the hood tip to the fender tip (second marking should be towards the window). This new marking should be on the hood side. Do the same on both sides of the hood. Loosen strut, align with correct markings, one side at a time, then tighten, rinse and repeat on the other side, and that should fix it. Good luck!
 

EZ-GT

Well-Known Member
Joined
Aug 8, 2020
Threads
7
Messages
98
Reaction score
105
Location
NJ
First Name
Eliam
Vehicle(s)
Whipple charged 2019 Mustang GT Convertible
Vehicle Showcase
1
The hood just looks a little too far forward. Should be an easy fix.

Measure the corner of the hood at the point that it should line up with the tip of the fender. Open the hood and put some painters tape on the hood strut and hood, and mark the current position. Make a slit in the tape to separate the piece on the strut from the piece on the hood, cuz you’re gonna need to shift it. Then mark the distance that you measured from the hood tip to the fender tip (second marking should be towards the window). This new marking should be on the hood side. Do the same on both sides of the hood. Loosen strut, align with correct markings, one side at a time, then tighten, rinse and repeat on the other side, and that should fix it. Good luck!

Thanks for the tip, going to give it a shot before I bite the Bullitt and go to body shop.
 
 








Top