Would a 315 in back work without issues?
315 35 20 fits on the back with no issues if you have the right wheel design and stock ride height. Maybe larger but I havent tried, thats about as tall of a tire as I would want to go though.
Thank you. I really like the CS-3 and planning on a 315/35/20 in the back with a 275/35/20 front. Also planning on installing the Steeda progressive springs which will drop it 1" in the back.
I think they may rub with a 1 inch drop on the back, so youd want to go with a shorter tire. I had problems with a 1 inch drop and 315 35 20s on my lowered 2011, had to put the stock springs back on the rear since they were rubbing bad on bumps.
Should work fine. I almost went 315 rears. I'm lowered inch and half in the front and a inch in the rear. 20x11 rears and 20x9.5 fronts not sure on the offsets off the top of my head.
if you intend to educate, you might want to elaborate *slightly*.
315 35 20 on the rear in that pic, currently on 295 35 20 and they may fit more proper the 315 had a little bit of bulge. Rear wheel is 20x10 pp1 replicas. Front in that pic is the stock pp1 255/40/19's but I put the 275 40 19 pp1 rears on the front with a 1 inch spacer now (they wouldnt fit with a 5mm due to hitting the struts , but the 1 inch makes it flush anyway). Looks great imo. Both front and rear are flush with fender now.
