sw686blue
Well-Known Member
- Joined
- Jul 1, 2015
- Threads
- 21
- Messages
- 408
- Reaction score
- 353
- Location
- Quebec, Canada
- First Name
- Nick
- Vehicle(s)
- 2017 Race Red Mustang GT PP
Very happy with the ride and look of my 20s....
Sponsored
Would a 315 in back work without issues?Shelby CS3's 305/30 rear 275/35 front
315 35 20 fits on the back with no issues if you have the right wheel design and stock ride height. Maybe larger but I havent tried, thats about as tall of a tire as I would want to go though.Would a 315 in back work without issues?
Thank you. I really like the CS-3 and planning on a 315/35/20 in the back with a 275/35/20 front. Also planning on installing the Steeda progressive springs which will drop it 1" in the back.315 35 20 fits on the back with no issues if you have the right wheel design and stock ride height. Maybe larger but I havent tried, thats about as tall of a tire as I would want to go though.
I think they may rub with a 1 inch drop on the back, so youd want to go with a shorter tire. I had problems with a 1 inch drop and 315 35 20s on my lowered 2011, had to put the stock springs back on the rear since they were rubbing bad on bumps.Thank you. I really like the CS-3 and planning on a 315/35/20 in the back with a 275/35/20 front. Also planning on installing the Steeda progressive springs which will drop it 1" in the back.
Should work fine. I almost went 315 rears. I'm lowered inch and half in the front and a inch in the rear. 20x11 rears and 20x9.5 fronts not sure on the offsets off the top of my head.Would a 315 in back work without issues?
Thanks!Should work fine. I almost went 315 rears. I'm lowered inch and half in the front and a inch in the rear. 20x11 rears and 20x9.5 fronts not sure on the offsets off the top of my head.
Tire sizes?I love having 20s on the back 19s on the front
if you intend to educate, you might want to elaborate *slightly*.I'll just leave this here.
315 35 20 on the rear in that pic, currently on 295 35 20 and they may fit more proper the 315 had a little bit of bulge. Rear wheel is 20x10 pp1 replicas. Front in that pic is the stock pp1 255/40/19's but I put the 275 40 19 pp1 rears on the front with a 1 inch spacer now (they wouldnt fit with a 5mm due to hitting the struts , but the 1 inch makes it flush anyway). Looks great imo. Both front and rear are flush with fender now.Tire sizes?