New LMR SVE SP2 Wheels (PP2 Replica)

[Brico]

Getting an allignment right now. Going for BMR recommended allignment specs as much as possible with the components I have. I'll post pics of allignment specs afterwards.

For those wanting to know specs:

2015 Mustang GT Performance Pack 1
13k miles
19x11+50 with Nitto NT05 305/35/19s all around
Eibach Pro springs
OEM Performance Pack Shocks
BMR CB005 installed in the rear
BMR camber bolts installed in the front

Looks great! How do you like the color now that you have your hands on them?

Sponsored

 

[Silver Bullitt]

Looks good! Anyone have experience with the NT05 versus MPSS or 4S tires? LMR makes it easy to order the wheel and tire combo, but I don't have any experience with the NT05.

I haven't ran MPSS or 4S, but I ran staggered 235/265 NT05's on my GTO. Rear traction was pretty good, not as good as a drag radial, but decent. But, I would have to say they were the most predictable street tire I've ever ran. Very easy to run right at the limit and know what the tires are going to do. Tread life was about 15K max.

I miss my old girl.

 

[Theisland]

To answer the questions posed:

1. I've always been a fan of bronze wheels, especially a red car on bronze wheels. My previous car was a lifted Jeep Wrangler with bronze TE37v replicas and 35 inch tires.

2. Just got around to taking some close up pics to show fitment. Again, specs are as follows:
- 19x11+50 with Nitto NT05 305/35/19 all around
- Eibach Pro Springs - about 1 inch drop all around
- BMR CB005 IRS lockout and brace
- BMR camber bolts on the front
- 25mm bolt-on spacer / adapter on the front (will convert to ARP extended studs and 25mm hub centric spacer ASAP)
- 2 degrees of negative camber on the front
- 1.75 degrees of negative camber on the rears

I think there may be space to fit a 20mm or 25mm spacer on the rears as well, considering many people have done a 325 rear tire. Does anyone with similar spec wheels and tires have input on this?

 

[Cobra Jet]

Those bronze PP2r’s look real nice!

19x11 up front huh...with no rubbing on the brake hoses or strut casings? I thought a 19x10 was the widest that could fit up front.

 

[Brico]

Ended up pulling the trigger on a set of Gloss Graphite SP2's in 19x10 all around. I didn't realize until just now there had been site wide sale on most of LMR's wheels lol! Unfortunately all the wheel+tire combos that were on sale were sold out except the set that comes with Ohtsu FP8000. I'm not super psyched about the tire but the deal was too good to pass up. Once I get them I'll post some pictures of how the 19x10 square setup looks and let you all know if I hate the tire or not lol.

 

[Theisland]

Those bronze PP2r’s look real nice!

19x11 up front huh...with no rubbing on the brake hoses or strut casings? I thought a 19x10 was the widest that could fit up front.

Thanks! No rubbing or clearance issues at all. The set-up isn't common but it's been done before. OEM fromt PP2 wheels are 19x10.5 with unknown offset wrapped in Michelin Cup 2s in 305/30/19. I would say my setup is very close to these OEM specs as the amount of poke in the front is similar to OEM PP2.

 

[Silver Bullitt]

Thanks! No rubbing or clearance issues at all. The set-up isn't common but it's been done before. OEM fromt PP2 wheels are 19x10.5 with unknown offset wrapped in Michelin Cup 2s in 305/30/19. I would say my setup is very close to these OEM specs as the amount of poke in the front is similar to OEM PP2.

The OEM PP2 19x10.5 are +24 offset.

 

[MyStang]

These are making me second guess widening my OEM wheels. Any pictures of Gloss Graphite on Magnetic grey Mustang?

 

[poncho@home]

These are making me second guess widening my OEM wheels. Any pictures of Gloss Graphite on Magnetic grey Mustang?

I'd like to see that as well.

 

[RedfireV8]

For those that have these wheels, do the factory lugs fit?

 

[dmann]

I'm about to order, so for the record these wheels will fit with no spacers(square) on a 2018 PP1?

Size: 19x10
Backspace: 6.66"
Offset: +35mm
Weight: 24.1lbs

 

[Brico]

I'm about to order, so for the record these wheels will fit with no spacers(square) on a 2018 PP1?

Size: 19x10
Backspace: 6.66"
Offset: +35mm
Weight: 24.1lbs

Yeah, the 19x10 +35 set will fit front and rear no spacers required.

You'd only need a spacer if you tried to put the 19x11's +50 on the front.

 

[dmann]

Did you all see these wheels drop to $949 a set during the day today?

 

[Dr. Norts]

Hopefully LMR releases these in 20" / Satin Black.

 

[ModularKid21]

For those that have these wheels, do the factory lugs fit?

I don’t have these wheels (yet) but from what I understand, the factory lugs are too big. And if you buy these wheels as a set from LMR, they come with a set of splined black lug nuts. Also, if I remember correctly, the factory center caps won’t fit either. I vaguely remember a member on here saying that GT350 center caps fit, but I could be wrong

Sponsored