Killer chiller system?

[Roh92cp]

Anyone try the killer chiller system, they have been around for a while now. Any comments welcome.
http://killerchiller.com/products/2015-2016-mustang-kc-kit-gen-3

Here is one on a gt500.
[ame]

Sponsored

 

[Roh92cp]

Instal on a 2015 GT with Roush twin screw.

 

[db252]

Hmmm :shrug:

 

[Roh92cp]

Hmmm :shrug:

I suspect the crickets will continue.

 

[esacteksab]

Instal on a 2015 GT with Roush twin screw.

Condensation on the killer chiller makes me wonder if that could leak on the track.

I know Crusty Nova used to run one like this (http://www.yellowbullet.com/forum/showpost.php?p=11775599&postcount=158) and he's been all over NHRA tracks.

I thought you ran the AC to cool things...so how do you keep that condensation off the track?

Wish they would have done 3 consecutive pulls and measured IAT after each pull. Curious if it can overcome something like that.

I'm also curious how it compares to Watson Racing's (http://shop.watsonracing.com/MUSTAN...K-WR-15-INTERCOOL-p/wr-15-intercoolertank.htm) or UPR's (http://www.uprproducts.com/tig-vision-intercooler-water-tank-mustang-15.html) ice tanks.

 

[Roh92cp]

I'm sure this is not designed for the hard core drag setup, but rather to keep the beast cool under heated street conditions.

 

[tsloms]

That does look very interesting. I don't see any reason why it wouldn't work very well for short bursts. Of course typically at full throttle the AC is turned off in nearly all cars. Still should work great. They also have a coupon for New Years!!

 

[venumous]

It's common in the Terminator world with cams and big blowers.

 

[db252]

They do make an add on that prevents the 'dripping' at the track. It shows as an add on even for the 15 and up via the main kit although not updated on this link.

http://killerchiller.com/products/killer-chiller-drag-option-add-on-to-the-base-kit

 

[Brn N Rubr]

A friend of mine is currently installing one on his KB 3.2 3V car. The install is relatively complicated and the provided instructions don't help a whole lot.

Depite that, from what I've heard they work very well.

 

[rs7337]

is this to be used stand alone or after the 3 pass heat exchanger... either way i'm liking it...
always wanted to just integrate return line on a/c on my old turbo car

 

[Eco85]

I'm sure this is not designed for the hard core drag setup, but rather to keep the beast cool under heated street conditions.

They make a drag kit

 

[Roh92cp]

They make a drag kit

Yeah I see that now. I always concede to the fact that I may be full of shit:headbonk:

 

[Z_Rocks]

Does it this affect the use of AC?

 

[rs7337]

no one has or knows about this?

Sponsored