New whipple install, started it up, no vacuum!!

[Roh92cp]

Is your bypass hose connected to the nipple on the drivers side towards the front of the intake? Also check the Whipple lower manifold it has 2 other 1/8 npt ports that should be plugged, make sure they have plugs. Your positive your Whipple intake and supercharger are sitting flush on the there surfaces with nothing in the way?

Did you check these things I mentioned above?

Sponsored

 

[DrDing.Muscle]

Did you check these things I mentioned above?

Yes I quoted you earlier and responded I am sure and yes I have confirmed the plugs are both there, one in the back on the driver side and one on the passenger side about halfway back the intake. Also yes when I put the lower manifold and the blower down they sat there on the surfaces with no gap anywhere on their own without me pushing them down. I made sure everything was out of the way when I put them down so there was nothing holding them up. Yes bypass hose is connected to the fitting on the driver side towards the front.

 

[DrDing.Muscle]

Here is the code I am getting.

 

[Roh92cp]

Here is the code I am getting.

Take your inlet elbow off and verify the throttle body blade closes and opens freely?

 

[DrDing.Muscle]

Okay fellas it is fixed!!! After working with [MENTION=19693]Will@Whipple[/MENTION] and showing him that code I had he had me remove the ETC harness that they send with their kit. I erased codes and started her up and she ran like a dream. One of the pins on the male side of that harness was not pressed in all the way. I was able to grab the pin with some pliers and pull it up and now she runs like a dream. I can't say enough about the support that Will gave me which is no doubt why Whipple is the best and so popular among car enthusiasts. Thanks Will!!!! You guys rock!!

 

[Tommy V]

Might have to do a crank relearn.

 

[DrDing.Muscle]

Might have to do a crank relearn.

Yes as soon as I get the car up to temp I will be doing that.

 

[Tommy V]

Good deal!!!!

 

[esacteksab]

Awesome. Congrats. Enjoy your Whipple.

Nice work on the OPG/CG/Whipple install!

 

[Roh92cp]

Okay fellas it is fixed!!! After working with [MENTION=19693]Will@Whipple[/MENTION] and showing him that code I had he had me remove the ETC harness that they send with their kit. I erased codes and started her up and she ran like a dream. One of the pins on the male side of that harness was not pressed in all the way. I was able to grab the pin with some pliers and pull it up and now she runs like a dream. I can't say enough about the support that Will gave me which is no doubt why Whipple is the best and so popular among car enthusiasts. Thanks Will!!!! You guys rock!!

Awesome, Whipple tech is top notch. By the way what is the ETC harness?

 

[SmokedSS]

Whipple Support is Great!!

 

[Tommy V]

Awesome, Whipple tech is top notch. By the way what is the ETC harness?

Electronic throttle control.

 

[GTBOB]

Nice! Now go ruin a set of tires and report back.

Sponsored