- Joined
- Dec 20, 2014
- Threads
- 171
- Messages
- 1,399
- Reaction score
- 636
- Location
- Lake Worth, FL
- Website
- www.uprproducts.com
- Vehicle(s)
- 15 GT
- Thread starter
- #1
We are proud to announce the release of the Nitrous Express Methanol kit which can only be bought through UPR Products.
This kit was tested on our shop Ecoboost which picked up a good 4mph which is HUGE!
(mounted for install purposes only)
The NX Methanol kit is unmatched for accuracy and adjust-ability in water-methanol injection systems. This system can be used on any forced induction engine, or ANY engine with a traditional EFI system, and features our LCD display with on-the-fly adjust-ability. Extremely easy to set up and dial in - the software creates a delivery map based on boost or EFI signal from just a few easy to set points you punch in from the drivers seat. The LCD Screen displays boost pressure, fuel injector duty cycle, as well as water-methanol injection percent. Quick, easy, positive adjustments are made with 2 push buttons. Low profile design allows for easy-to-view and discrete mounting. Kit includes: UHO (Ultra High Output) Pump 3 Quart Reservoir LCD Screen, Push button Digital Variable Mapping Controller 2 Nozzles To Cover a Wide Range of Horsepower 10 feet High Pressure Tubing (1200psi burst) Comprehensive Instructions
The Low Flow Safety Switch for use with NX water/methanol injection systems can trigger a boost cut solenoid or a timing retard module. It is designed to activate a safety mode in case you run out of Water/Methanol. The Low Flow Safety Switch allows for a safe tune in those instances where no Water/Methanol injection is present and an aggressive tune when Water/Methanol is utilized.
Key Features about this system:
1. Fully adjustable alarm set point
2. Retard Timing- detailed instructions on integrating with MSD, J&S Safeguard, & other popular aftermarket ignitions.
3. Optional Solenoids to open waste gates or bypass valves to reduce boost.
4. Faster response time and can display real time flow in ml/min
5. Overflow alarm for leak detection.
More Features about this kit:
» Digital Variable Mapping Controller with LCD Screen
» UHO (Ultra High Output) Pump
» 3 Quart Reservoir
» 2 nozzles
» Low Flow Safety Switch (15040)
» Fluid Flow Solenoid Upgrade w/fitting (15055)
This complete kit goes for $849.99 (call or PM for intro-discount)
Link:
http://www.uprproducts.com/nitrous-express-stage-3-methanol-kit-ecoboost-mustang-15.html
If anyone has any questions, please feel free to call us at 561-588-6630 or PM myself or Joe.
Thanks
This kit was tested on our shop Ecoboost which picked up a good 4mph which is HUGE!
(mounted for install purposes only)
The NX Methanol kit is unmatched for accuracy and adjust-ability in water-methanol injection systems. This system can be used on any forced induction engine, or ANY engine with a traditional EFI system, and features our LCD display with on-the-fly adjust-ability. Extremely easy to set up and dial in - the software creates a delivery map based on boost or EFI signal from just a few easy to set points you punch in from the drivers seat. The LCD Screen displays boost pressure, fuel injector duty cycle, as well as water-methanol injection percent. Quick, easy, positive adjustments are made with 2 push buttons. Low profile design allows for easy-to-view and discrete mounting. Kit includes: UHO (Ultra High Output) Pump 3 Quart Reservoir LCD Screen, Push button Digital Variable Mapping Controller 2 Nozzles To Cover a Wide Range of Horsepower 10 feet High Pressure Tubing (1200psi burst) Comprehensive Instructions
The Low Flow Safety Switch for use with NX water/methanol injection systems can trigger a boost cut solenoid or a timing retard module. It is designed to activate a safety mode in case you run out of Water/Methanol. The Low Flow Safety Switch allows for a safe tune in those instances where no Water/Methanol injection is present and an aggressive tune when Water/Methanol is utilized.
Key Features about this system:
1. Fully adjustable alarm set point
2. Retard Timing- detailed instructions on integrating with MSD, J&S Safeguard, & other popular aftermarket ignitions.
3. Optional Solenoids to open waste gates or bypass valves to reduce boost.
4. Faster response time and can display real time flow in ml/min
5. Overflow alarm for leak detection.
More Features about this kit:
» Digital Variable Mapping Controller with LCD Screen
» UHO (Ultra High Output) Pump
» 3 Quart Reservoir
» 2 nozzles
» Low Flow Safety Switch (15040)
» Fluid Flow Solenoid Upgrade w/fitting (15055)
This complete kit goes for $849.99 (call or PM for intro-discount)
Link:
http://www.uprproducts.com/nitrous-express-stage-3-methanol-kit-ecoboost-mustang-15.html
If anyone has any questions, please feel free to call us at 561-588-6630 or PM myself or Joe.
Thanks
Sponsored