Aggressive Fitment Thread

[fordguys550]

10" wide et40 wont fit????? weird cause my 10"wide et25 fits just fine. they might need spacers in front at et40 though

Sponsored

 

[Todd15Fastback]

I have WORK CR2P 20x10 +33 (running 5mm spacer) and 20x11 +45. 285/35/20 and 305/35/20 Goodyear Eagle F1 Supercar G:2 tires. Lowered on Steeda progressive springs.

The rears are perfectly flush with the rear fenders and the front are just about flush, off by a few mm. No rubbing on the front or rear with the wide tires.

 

[fordguys550]

Todd, those look BADASS on your ride!!

 

[Todd15Fastback]

Todd, those look BADASS on your ride!!

Thanks man, I agree:cheers:

 

[GetYourWheels]

20x10 Niches will fit front and back but 305 is really rather wide for a 10" rim.

Heres a 295/35/20 Nitto Invo on the rear of the TSW Portiers 20x10 +40

Its pretty tight! 305/35/20 may work with a bit of camber

More photos here from the full shoot

 

[MELLOWYELLOW06]

I just went through 41 pages and took me a couple hours.. lots of bad ass fitments.. BUT.. I am playing with a size and I don't know if maybe someone can chime and let me know.. Im looking at getting some Niche 20x10's with 40mm offset all around..
Does anyone know if a 305/30-20 will sit perfect for a rear along with maybe a 285/30-20 for the front? has anyone seen that done?
Im lowered on Steeda progrssives.. only about an inch drop
any ideas? pictures on them? thanks

http://www.mustang6g.com/forums/showthread.php?t=15709&page=2

Go to this link. Look at post #34, [MENTION=13100]paydirt[/MENTION] car. He has the setup you are looking for that Paul from Need for Speed did for him.

 

[KGT]

I have WORK CR2P 20x10 +33 (running 5mm spacer) and 20x11 +45. 285/35/20 and 305/35/20 Goodyear Eagle F1 Supercar G:2 tires. Lowered on Steeda progressive springs.

The rears are perfectly flush with the rear fenders and the front are just about flush, off by a few mm. No rubbing on the front or rear with the wide tires.

Excellent setup. One of my favorites. Why did you give 5mm spacer? Is it because of big Brembo calipers or just to make wheel flush? Was it possible to order smaller offset in front wheels for example +28 instead of spacers?
I love wheels with step lip but most of it would not fit on Brembo brakes.
I'm looking for wheels for my GT and I don't like flat face wheels on fwd. I'm tying to find either deep concave or step lip square but it's difficult with Brembos.

 

[Todd15Fastback]

Excellent setup. One of my favorites. Why did you give 5mm spacer? Is it because of big Brembo calipers or just to make wheel flush? Was it possible to order smaller offset in front wheels for example +28 instead of spacers?
I love wheels with step lip but most of it would not fit on Brembo brakes.
I'm looking for wheels for my GT and I don't like flat face wheels on fwd. I'm tying to find either deep concave or step lip square but it's difficult with Brembos.

Thank you!!

I ran the 5mm spacer as I planned on running the flat center caps which needed the spacer. I instead went with the raise caps but left the spacer.

With these WORK wheels, you can get whatever offset you want in 1mm increments. +28 on the front should work as best that I can tell.

This is what sold me on these wheels: stepped lip and fully customizable offsets.

If you are interested, but can put you in touch with Mark Chin at RavSpec who sold me my complete setup.

 

[ultimate warrior]

I have WORK CR2P 20x10 +33 (running 5mm spacer) and 20x11 +45. 285/35/20 and 305/35/20 Goodyear Eagle F1 Supercar G:2 tires. Lowered on Steeda progressive springs.

The rears are perfectly flush with the rear fenders and the front are just about flush, off by a few mm. No rubbing on the front or rear with the wide tires.

lose the red dots in the middle of the rims it cheapens what you're trying to do. get a vinyl guy to cut you a circle that will fit over them.

 

[KGT]

Thank you!!

I ran the 5mm spacer as I planned on running the flat center caps which needed the spacer. I instead went with the raise caps but left the spacer.

With these WORK wheels, you can get whatever offset you want in 1mm increments. +28 on the front should work as best that I can tell.

This is what sold me on these wheels: stepped lip and fully customizable offsets.

If you are interested, but can put you in touch with Mark Chin at RavSpec who sold me my complete setup.

Thanks for the info. So you reckon wheels without spacers would clear Brembo calipers? Do you know if original Mustang caps would fit to these wheels?
I've checked RavSpec website and it looks impressive. Prices are ok but I'm from Europe so cost of delivery might kill the good offer. We'll see. I will hold on with decisions. I've seen somewhere there is cooperation of Vossen and Works but I haven't seen the wheels and prices anywhere yet. Another thing I'm still not sure which color of wheels I would prefer to my Magnetic Grey GT. I was thinking about glos black with shiny lip but I like yours Silver too :headbonk:. Decisions decisions...

 

[Todd15Fastback]

lose the red dots in the middle of the rims it cheapens what you're trying to do. get a vinyl guy to cut you a circle that will fit over them.

Cheapens? Completely disagree with your opinion.

These are aluminum, WORK, raised center caps. $200 to be exact. I will eventually get my Brembo's painted or powdercoated red, too.

 

[Amaury]

Cheapens? Completely disagree with your opinion.

These are aluminum, WORK, raised center caps. $200 to be exact. I will eventually get my Brembo's painted or powdercoated red, too.

Ignore him. He is just being a troll.

 

[stoli]

Forgestar F14
275/40 MPSS 19x10et42 + 20mm spacer
285/40 MPSS 19x11 (not 100% sure on offset, lost the paperwork)
Eibach Pro springs.

New, more appropriate size rears coming soon. ;)

Not the best pics, but since I was next to a stock PP I figured it was a good comparison.

 

[Blackbeauty]

Forgestar F14
275/40 MPSS 19x10et42 + 20mm spacer
285/40 MPSS 19x11 (not 100% sure on offset, lost the paperwork)
Eibach Pro springs.

New, more appropriate size rears coming soon. ;)

Not the best pics, but since I was next to a stock PP I figured it was a good comparison.

Forgive me if you posted one already, but do you have a side shot of just your car? I really like the Forgestars and they are the front runner in my choice of rims (kinda leaning to those 5-spokes, whatever the name is)


Sent from my iPhone using Tapatalk

 

[stoli]

Forgive me if you posted one already, but do you have a side shot of just your car? I really like the Forgestars and they are the front runner in my choice of rims (kinda leaning to those 5-spokes, whatever the name is)

I don't have the spacer up front in this pic...

Sponsored