ZL1 Add-Ons PP2 Style Splitter?

[KT3]

Hey guys,

https://zl1addons.com/collections/mustang-2005-2018/products/mustang-18-19-fender-extension-kit

Looking at this particular kit here for my 2019 Mustang GT... Does anybody have experience with these guys?

Sponsored

 

[cmxPPL219]

Hey guys,

https://zl1addons.com/collections/mustang-2005-2018/products/mustang-18-19-fender-extension-kit

Looking at this particular kit here for my 2019 Mustang GT... Does anybody have experience with these guys?

They're actually a great vendor. I bought rock guards from them, but I experienced a problem whereby they were starting to lift away from the front fender's wheel well lip. (A portion of the length of rock guards are held by double-stick tape, in addition to using the OEM clips near the bottom; it was lifting off the tape)

I had reached out to them expecting a run-around or just plain being ignored. But, to my surprised, they took my feedback, and actually redesigned them by adding an additional hole to mount an additional clip to prevent the rock guard from lifting off. They sent me the updated set for free.

I since switched the rock guards to Rok Blokz, but the point is, they seem like a great stand-up company.

 

[KT3]

They're actually a great vendor. I bought rock guards from them, but I experienced a problem whereby they were starting to lift away from the front fender's wheel well lip. (A portion of the length of rock guards are held by double-stick tape, in addition to using the OEM clips near the bottom; it was lifting off the tape)

I had reached out to them expecting a run-around or just plain being ignored. But, to my surprised, they took my feedback, and actually redesigned them by adding an additional hole to mount an additional clip to prevent the rock guard from lifting off. They sent me the updated set for free.

I since switched the rock guards to Rok Blokz, but the point is, they seem like a great stand-up company.

Well it’s good to hear a positive .. I really like the design of this particular splitter set .. But don’t want to be excited to later find out it damages my cars components

 

[cmxPPL219]

Do you have a PP car? I took a quick look at the link for the splitter, and it looks like it won't fit on the non-PP front end (the integrated OEM splitter in the bumpers are different between GT and GT PP (Ignore if you knew this)

 

[KT3]

Do you have a PP car? I took a quick look at the link for the splitter, and it looks like it won't fit on the non-PP front end (the integrated OEM splitter in the bumpers are different between GT and GT PP (Ignore if you knew this)

Haha, yes my GT is a PP1. I just want to know how good the material is

 

[cmxPPL219]

Haha I see np. Honestly the material looks great, and strurdy, not some flimsy ebay POS. In fact, ZL1 seems to love thicker materials, because part of the problem I noticed when analyzing my Rock Guards from them, is that it was lifting off the double stick tape not so much because the tape wouldn't hold it - it's because the material they made the rock guard from was, imo, a bit too thick, whereby it wouldn't keep the shape of the fender arch, and then of course the tape wouldn't hold it.

Btw, roughly where in the six are you? I didn't even notice your location till I posted the reply lol.

 

[KT3]

Haha I see np. Honestly the material looks great, and strurdy, not some flimsy ebay POS. In fact, ZL1 seems to love thicker materials, because part of the problem I noticed when analyzing my Rock Guards from them, is that it was lifting off the double stick tape not so much because the tape wouldn't hold it - it's because the material they made the rock guard from was, imo, a bit too thick, whereby it wouldn't keep the shape of the fender arch, and then of course the tape wouldn't hold it.

Btw, roughly where in the six are you? I didn't even notice your location till I posted the reply lol.

I’m going to give them a call on Monday and have a bit of a chat because the splitter kit looks awesome and something I would love on my GT ..

I’m actually in York Region - Aurora. Wbu?

 

[cmxPPL219]

Gotcha. I'm a fair bit more south, just bordering Markham / Scarborough.

Yeah reach out and see what they say, it does look like a legit piece. GL!

 

[KT3]

Gotcha. I'm a fair bit more south, just bordering Markham / Scarborough.

Yeah reach out and see what they say, it does look like a legit piece. GL!

Thanks!

 

[frank s]

Good products, conscientious designer-producers-installers, a pleasure to work with. I'll be going back in a few weeks for another dose.

 

[KT3]

Good products, conscientious designer-producers-installers, a pleasure to work with. I'll be going back in a few weeks for another dose.

I bought the OEM pp2 splitter from ford. i can’t trust these products tbh

Sponsored