Wheel Tire question

[Decible]

I was looking at FP M-1007K-DC19XMB wheel kits. It’s a heck of a deal for 1400.00 and I actually like the wheels. This is the same wheels set up on the PP2 cars. I plan on running 305/30-19’s at all 4 corners. Will these cause any tire-to-body/chassis clearance issues? I’ve researched and I can’t find any difference between the PP1 and PP2 cars as far as suspension goes. In two weeks my car will get Ford Performance M-9602-M handling pack which I understand to basically be the gt350 springs and sway bars with PP2 shock tuning.

Sponsored

 

[shogun32]

PP2 cars have a diferent front wheel well liner. It doesn't seem to be necessary so not sure why the Factory chose to deviate. We don't know anything about the MR tuning in the kit and how close/same it is to Bullitt, or PP2 or GT350(non-R). You would need to dump the firmware. In any event people seem to find the updated values useful.

 

[Decible]

PP2 cars have a diferent front wheel well liner. It doesn't seem to be necessary so not sure why the Factory chose to deviate. We don't know anything about the MR tuning in the kit and how close/same it is to Bullitt, or PP2 or GT350(non-R). You would need to dump the firmware. In any event people seem to find the updated values useful.

So the wheel well liners are different. I saw a video for the FP MR suspension. The engineer said the springs and sway bars were comparable to the GT350 and the shock tuning software was only needed for PP1 cars. If you had a PP2 or non- R 350 you only needed the springs and bars.

Sponsored