What did you do to your S550 Mustang today?!

[Wallym]

Supercharger

Sponsored

 

[m3incorp]

Ordered new Continental ExtremeContact Sport 02 Tires. Saved about $400 with the current discounts.

Interested to see how these perform. I wanted to stick to 275/35 for the fronts, but they don't come in that size. I am thinking the 285/35 should still be ok.

 

[shogun32]

Ordered new Continental ExtremeContact Sport 02 Tires. Saved about $400 with the current discounts.

Interested to see how these perform. I wanted to stick to 275/35 for the fronts, but they don't come in that size. I am thinking the 285/35 should still be ok.

your receipt says 785 in savings. ie. you got the fronts for free. Can you explain the delta between receipt and the rough-400? I wish USAA would add Conti to the member benefits. I like buying tires at 25-30% off.

 

[m3incorp]

That $785 in savings would be off of inflated prices....ie what the original MSRP was. What they really sell for in every shop are the prices you see for each set on the receipt. That total would be $1655.96 + $120 tax for a total of $1775. The discounts were 20% off of that total, bringing it down to the $1358, as shown on the receipt. I also wish USAA would add them or at least the SimpleTire Store. I did use Rakuten, and that will equal $55 cash back.

your receipt says 785 in savings. ie. you got the fronts for free. Can you explain the delta between receipt and the rough-400? I wish USAA would add Conti to the member benefits. I like buying tires at 25-30% off.

 

[ScubaSteve2020]

First of all, thank you very much to everyone for the positive comments! Honestly, it's not my idea to produce and sell, also because I'm from Europe, and the market mainly in my country is very small. But I can help in another way, I share the files with the community and you can produce locally. I would be happy to see this idea applied to other mustangs. About the magnet, I put the magnet on the acrylic (double side tape), and also with double-sided tape I placed a small metal plate over the "shaker" logo. Using the magnet has another advantage, which is to give a few millimeters of thickness to compensate for the ring of the lighter "body", which I kept in place. It's an easy thing to do.
Keep in mind that I kept the usb port small and use an extension/adapter, if you want a bigger hole in the usb port you can edit the design.


The wetransfer link for those who are interested in doing it:


https://we.tl/t-rTGw1vA83a

I'd say anchor-room.com would take on providing those

 

[ice445]

My TEK of the C's arrived. This winter has been obscene so I've been not driving it as much as I'd like. Gotta wire this up when it stops snowing, lol.

 

[MAGS1]

Can you ceramic coat these ?

Should be able to. Just not the threads LOL

 

[WoodburnGT]

Got the G-Force axles in and the ARP studs in.

 

[Prodigal]

Got the G-Force axles in and the ARP studs in.

Looks great. Did you get the new FP hub assemblies with the ARP studs already installed or did you hammer out the factory and install the ARP into your existing hubs?

 

[Highvolts]

Looks great. Did you get the new FP hub assemblies with the ARP studs already installed or did you hammer out the factory and install the ARP into your existing hubs?

https://www.mustang6g.com/forums/th...50-mustang-today.11109/page-3693#post-3716154

I think they swapped the studs.

 

[WoodburnGT]

Looks great. Did you get the new FP hub assemblies with the ARP studs already installed or did you hammer out the factory and install the ARP into your existing hubs?

I bought the ARP studs. I removed the entire knuckle and took them to Les Schwab tire center….they swapped them for $40.

 

[gameovergt]

Ordered Steeda motor mounts. getting TSP headers(catted) on Monday along with Steeda rear drag sway bar/170 degree thermostat. Waiting on PBD tune still (ordered on Jan 20th via Lethal Performance). Took me over an hour to get the stock tune downloaded Thursday via the RTD & emailed to PBD. It did not want to connect. Didn't realize you have to select TC-298, lol. Slowly doing small stuff before FI.

 

[16Fastback]

My TEK of the C's arrived. This winter has been obscene so I've been not driving it as much as I'd like. Gotta wire this up when it stops snowing, lol.

Been using this for 6 yrs now love it.works great saves the battery.

 

[The Demon]

Took it to cars and coffee this morning. Man that is so much fun every time. That Volkswagen by the way, has a Chevy 427 in it. Ridiculous.

 

[MidwayJ]

Put about 200 miles on it cruising from DFW up to a Nocona, TX. We visited a cool classic car museum that was a Chevrolet dealership back in the day.

Sponsored