- Joined
- Dec 20, 2014
- Threads
- 171
- Messages
- 1,399
- Reaction score
- 635
- Location
- Lake Worth, FL
- Website
- www.uprproducts.com
- Vehicle(s)
- 15 GT
- Thread starter
- #31
These shocks are stock length so theirs no worry thereI've got some questions about these shocks in an autocross application. The car would be used in SCCA F Street class and two rules could trip up the use of these depending on their dimensions. Any chance someone has the answer to these questions:
1. Is the extended length of the shock +/-1" of the OEM shock?
2. I saw a comment that these shocks don't require a bumpstop but Street category rules require one if the car came with one. Is the bumpstop built into the shock? Could one be installed on the shaft and have the same, or slightly less, travel as the OEM setup?
Thanks!
2. These do not use the factory snubber and dust boot. When they go through the upper mount that connects to the frame. That will act as your new bump stock.
The Warriors will be more then enough for autocross.
Sponsored