Whozyodaddy
Active Member
- Joined
- Aug 19, 2021
- Threads
- 10
- Messages
- 31
- Reaction score
- 2
- Location
- Vancouver, WA
- First Name
- That guy
- Vehicle(s)
- 16 GT
- Thread starter
- #1
I have a new to me ‘16 GT base. Obviously the stock stereo blows. I installed an LC2i pro LOC and a four channel amp. Currently I have the main channel RCA’s on the LC2i running to channel 1 and 2 on the amp. These channels from the amp are run to Infinity door components. The other two channels from the LC2i (bass boost channels) are running to channel 3 and 4 on the amp. These are bridged to a kicker sub.
I keep experiencing a lack of power to the sub (hits hard, then quiets down) randomly. Also, when I hook up my phone to the system to play music, the amp goes into protection mode.
Could this just be my ground not being great (used bolt between rear seats), or something else? I have not used Forscan to flatten the system. I appreciate any help or additional questions to help clarify. Thx!
I keep experiencing a lack of power to the sub (hits hard, then quiets down) randomly. Also, when I hook up my phone to the system to play music, the amp goes into protection mode.
Could this just be my ground not being great (used bolt between rear seats), or something else? I have not used Forscan to flatten the system. I appreciate any help or additional questions to help clarify. Thx!
Sponsored