V8EATR
Well-Known Member
- Thread starter
- #1
So I finally did my first track day at Road America and had an absolute blast. Will definitely go again soon. Car did VERY well. 15 PP, steeda 2 piece rotors, Motul fluid, stock pads, BMR minimum drop springs on stock strut/shocks, bushings, etc...Project 6gr wheels with 285F/295R Pilot Sport 4s. I have the front sway bar mod as well. The car felt balanced, just felt heavy in the corners. I'll be looking once my stock pads wear out to get a set of track pads. I have seen lots of info on this. These rotors are expensive so I want something nice on rotors. The PP pads were great (I was being slightly conservative because RA is an extremely fast track, car hit 140-150 twice per lap).
I feel in addition to track pads I will switch over to the FRPP track strut/shocks with the BMR handling springs and go with R888 once the 4s's wear out.
Thoughts on the pads? (DSuno, Hawk DTC-70, etc)
I feel in addition to track pads I will switch over to the FRPP track strut/shocks with the BMR handling springs and go with R888 once the 4s's wear out.
Thoughts on the pads? (DSuno, Hawk DTC-70, etc)
Sponsored