Sponsored

This is my FAVORITE modification so far!

High Velocity

Well-Known Member
Joined
Sep 6, 2023
Threads
30
Messages
319
Reaction score
445
Location
Richmond, VA
Vehicle(s)
2021 Ford Mustang GT
Alright everybody, My rear seat delete kit came in today. So it was time to do the prep work before the install. I started by taking out the old seat, did some vacuuming and wiped everything down with some rinse less wash.

After that I decided to lay down some sound deadener. I went with Amazon basics for this. It was only about 15 bucks and figured it would be better than nothing in there.

Now for the sound deadener I weighed it before I installed it. The whole pack was about 6.5 pounds but I did not use all of it. The rear seat delete is supposed to shave 30 pounds off the car and I probably added about 4 pounds back in the sound deadener. But it is definitely worth it.

After I laid down the sound deadener I decided to wrap the seat belt buckles in a layer of foam. I wrapped the foam around the buckle and zip tied it. Then taped it down to the floor with some 3m heavy duty tape. This way it will not make any noise under the seat delete.

The reason I did this instead of removing it, is because there were wires running to the buckle and if I had removed the buckle and unplugged that harness I was worried I would get a light on the dash.

IMG_3130.webp

So after all the prep work was done I moved on to installing the rear seat delete. I paid extra for it to be engraved and painted. But I also paid extra to have the bottom piece where you would sit carpeted.

I also paid to have the back of the panel with the logo on it carpeted. That way when you open the trunk, the whole trunk has carpet. Now I completely installed the back piece with the logo on it but have not fully installed the seat piece.

The reason for that is because you can see just how bad the gaps are on the bottom piece. So I am leaving this part loose until I come up with an idea to fill these holes. But you can still see what it looks like for the most part.

It looks amazing. You can even see it from outside the car at the driver and passenger windows and when standing at the front of the car looking through the windshield.

IMG_0260.webp

IMG_0264.webp

IMG_0261.webp

IMG_0262.webp


Now here are the gaps I am talking about.
IMG_0265.webp

IMG_0263.webp

And the view front the trunk
IMG_0266.webp
Sponsored

 

BlkMach10510

Well-Known Member
Joined
Mar 9, 2023
Threads
40
Messages
1,312
Reaction score
2,373
Location
Texas
Vehicle(s)
2023 Mach 1 10R80
Nice, welcome to the club. I had mine custom engraved from emp.


IMG_4066.webp
 

RocketGuy3

Well-Known Member
Joined
Jul 27, 2014
Threads
41
Messages
1,421
Reaction score
942
Location
FL
Vehicle(s)
2021 Mach 1 6MT, 2025 Cayman GT4 RS, 2025 RS3
Looks good. Although to be honest, I'm surprised the rear seat delete only saves 30 lbs. I always just sort of figured it would be closer to a hundo or so.
Sponsored

 
 








Top