DrumReaper
Well-Known Member
- Joined
- May 17, 2015
- Threads
- 114
- Messages
- 4,985
- Reaction score
- 3,706
- Location
- South East
- Vehicle(s)
- 1971 429CJ Mach 1, 2012 Boss 302
- Thread starter
- #1
Well, I was told that Ford didn’t want to warranty my tail light panel broken emblem so I decided to fix it myself. This is not a hard repair to do so don’t get stressed if it seems to be a lot.
Prep work is key... I suggest that when you remove your tail light panel to lay it down on something soft and then tape the edges so that you don’t scratch anything up.
When you do remove your emblem, I’d suggest taping off the exposed side of the emblem to protect that as well.
Lastly, try to get it warrantied if your car is still under warranty... if it is out, you can use this approach, or whatever works for you.
Cheers.:cheers:
This is what I started with. The 7 o’clock plastic support broke.
Prep work is key... I suggest that when you remove your tail light panel to lay it down on something soft and then tape the edges so that you don’t scratch anything up.
When you do remove your emblem, I’d suggest taping off the exposed side of the emblem to protect that as well.
Lastly, try to get it warrantied if your car is still under warranty... if it is out, you can use this approach, or whatever works for you.
Cheers.:cheers:
This is what I started with. The 7 o’clock plastic support broke.
Sponsored
Last edited: