Sponsored
sjmurphy34
Well-Known Member
There's a thread on them here: https://www.mustang6g.com/forums/threads/new-lmr-sve-sp2-wheels-pp2-replica.113960/
Assuming you're running 10in wheels up front you really won't have much if any poke as the 10in wheel at +35 offset sits pretty flush with the fenders. If you run 11's up front you'll have some poke and maybe need a spacer and some camber. Both the 10's and 11's should sit pretty flush in the rear.
Assuming you're running 10in wheels up front you really won't have much if any poke as the 10in wheel at +35 offset sits pretty flush with the fenders. If you run 11's up front you'll have some poke and maybe need a spacer and some camber. Both the 10's and 11's should sit pretty flush in the rear.
Mustang_Lou
Well-Known Member
- Joined
- May 1, 2016
- Threads
- 13
- Messages
- 1,820
- Reaction score
- 777
- Location
- Toronto, Canada
- Vehicle(s)
- 2020 Mustang Bullitt
I had some Project 6GR wheels 19x10 all around with the same 35mm offset and they were PERFECT!