Steeda's Race Car Development - Build Thread

[Gen 6 Mach1]

Good Day Steeda Tech , I keep up to date on your components and the likings of all here on the 5star reviews. I currently have a 21 Mach1 I'm keeping Stock , but a friend gave me brand new front sway bar links , I've had for a few months. I figured better on the car than on the shelf in the original box they came in . Should I install them , will they change the alignment, will they advirsely effect the suspension, is this a straight forward installation , or should I sell on eBay. Thank you .

Sponsored

 

[NGOT8R]

I’d install them. The fact that they have grease zerk fittings makes them an improvement over the factory links.

 

[Steeda-Sergio]

Good Day Steeda Tech , I keep up to date on your components and the likings of all here on the 5star reviews. I currently have a 21 Mach1 I'm keeping Stock , but a friend gave me brand new front sway bar links , I've had for a few months. I figured better on the car than on the shelf in the original box they came in . Should I install them , will they change the alignment, will they advirsely effect the suspension, is this a straight forward installation , or should I sell on eBay. Thank you .

Hi, endlinks won't change your alignment. Here is a copy of the install instructions: 555-1040-installation-instructions-v2.pdf

 

[NGOT8R]

New product for Racers from Steeda, steering rack limiters.
https://www.steeda.com/steeda-555-8602-s55-steering-rack-limiter-stops

I reviewed Steeda’s instructions for these and they only show the driver’s side (smooth side of steering shaft), being installed. The instructions fail to mention and/or show that the passenger side portion of the steering rack shaft is a ball screw design. Installing these limiters on the passenger side would mean they have to clip into the valleys of the screw shaft, which would make them floating and there would be space between each clip because of the peaks in the screw shaft which would seem ineffective. Will you please post pics of the passenger side being installed? Thanks

 

[tj@steeda]

I reviewed Steeda’s instructions for these and they only show the driver’s side (smooth side of steering shaft), being installed. The instructions fail to mention and/or show that the passenger side portion of the steering rack shaft is a ball screw design. Installing these limiters on the passenger side would mean they have to clip into the valleys of the screw shaft, which would make them floating and there would be space between each clip because of the peaks in the screw shaft which would seem in effective. Will you please post pics of the passenger side being installed? Thanks

Let me send this to our team - once I know more, I will provide you with what you are requesting.

Best,

TJ

 

[NGOT8R]

Let me send this to our team - once I know more, I will provide you with what you are requesting.

Best,

TJ

Right on TJ! Thanks

Sponsored