Steeda Jacking Rails, PROBLEM

[351MachOne]

Hey guys, Steeda packed the wrong size bolts with my rails.

I am currently re-using the 4 factory bolts that were provided.

My question, is there any harm in leaving the last bolt on the rear empty?

This is the bolt that you remove and keep if you plan on doing the IRS subframe braces. Currently, I am going to use that bolt to attach the jacking rail.

Second question, why does Steeda supply new hardware? Why not re-use the factory bolts?

Thanks in advance...

Sponsored

 

[ForTehNguyen]

PM Steeda to get you some new bolts, they will take care of you

 

[351MachOne]

I am sure Steeda will be able to help. But it being after hours, I was hoping someone here was informed about those under body bolts and if I was 'OK' with my solution.

 

[Toowired]

I re used all the stock bolts. I only used theirs for the one hole on each side that was empty. Nothing wrong with using the factory bolts.

 

[Brian V]

I made my own jacking rails ! I made my own hood strut fix also ...

Whats the word they use ?

Proprietary !

Shoot those guys are amatures !

 

[CompO5.sl0w]

I'm sure [MENTION=10893]David@Steeda[/MENTION] will take care of you. That being said, I don't think one bolt missing is going to cause a problem. It's not like its part of the active suspension or anything.

 

[89Trooper]

I re used all the stock bolts. I only used theirs for the one hole on each side that was empty. Nothing wrong with using the factory bolts.

I did the same.

Sponsored