Installed Steeda Jacking Rails

[BlackBoostedStang]

Just finished installing Steeda Ultralight Low Profile Jacking Rails on my GT and I wanted to put my my 2 cents for anyone thinking of this mod.

I don't have 2 cents, rather 2 words.. DO IT

Incredibly easy install. The exact definition of "bolt on part". 4 bolts for each side and you can easily jack up your car in half the time!

Here are some up-close pictures of the install as well as a video that includes the install






Video starts @7:32

Sponsored

 

[Bob_Whit]

Why only 3? The rails come with 4.

I did this last weekend without jacking the car up. I used a woman's tabletop mirror to see the bolts & holes. Only hard part was screwing the bolts correctly because the mirror image is reversed.

 

[tj@steeda]

Thank you for the feedback & support ... these are one of our hottest items & they continue to be well received by you, the consumer!

Best Regards,

TJ

 

[BlackBoostedStang]

Why only 3? The rails come with 4.

I did this last weekend without jacking the car up. I used a woman's tabletop mirror to see the bolts & holes. Only hard part was screwing the bolts correctly because the mirror image is reversed.

Typo! There are 4 on each - fixed

 

[JuRuKi]

Whats the big deal about these things? Do they let you jack up the car from any part of the rail?

 

[HISSMAN]

I agree 100% with the OP. These have made my life so much easier and less stressful. It really should be a first mod.

-Jeff

 

[Rambl3r]

Whats the big deal about these things? Do they let you jack up the car from any part of the rail?

Yes.

 

[tj@steeda]

The small investment up front ... pays dividends with time saved working on the car down the road!

You will be very happy with these jacking rails - both from a quality & practicality standpoint!

Best Regards,

TJ

 

[HappySquirrel]

Whats the big deal about these things? Do they let you jack up the car from any part of the rail?

Yeah, the only problem is that after you install these you can't really jack up just the front end or just the rear end (using the side rails). You either jack up both right wheels, both left wheels, or all 4 (using 4 jack stands). But...it's totally worth it. Makes getting the car off the ground a piece of cake, as opposed to a nerve-wracking experience. I definitely recommend them.

 

[Dominant1]

Tj if i already have the irs subframe braces then i cant mount these jack supports because they use the same bolts right?

 

[tj@steeda]

Tj if i already have the irs subframe braces then i cant mount these jack supports because they use the same bolts right?

Yes, they will work together without interference or issues!

Great combo ... you will be very happy :cheers:

Best Regards,

TJ

 

[sharp21]

Looking forward to getting a set. I've had my car on jackstands 3 times in the past 2 months. Would have made a huge difference...

 

[tj@steeda]

Just finished installing Steeda Ultralight Low Profile Jacking Rails on my GT and I wanted to put my my 2 cents for anyone thinking of this mod.

I don't have 2 cents, rather 2 words.. DO IT

Incredibly easy install. The exact definition of "bolt on part". 4 bolts for each side and you can easily jack up your car in half the time!

Here are some up-close pictures of the install as well as a video that includes the install






Video starts @7:32

These Jacking Rails for both the Coupe & Convertible are flying off the shelves ... don't delay, get yours today!

TJ

 

[A.Mustang]

Did anyone not grind off the seam sealer? Would it be ok to just bolt over it and leave it alone?

 

[SteedaTech]

Did anyone not grind off the seam sealer? Would it be ok to just bolt over it and leave it alone?

It's best to remove the seam sealer to install.Just enough to clear,apply primer sealer to the area before installing the jacking rails

Sponsored