Spacers On Bullitt?

[Bulutt]

Oh, just learned something new..

No spoiler, special colour, no badges, special wheels, chrome trim, special interior, manual only, cueball shift knob, etc. etc

Sponsored

 

[ArmyChap]

opening an older thread, the Steeda instructions say something about new lug nuts or needing extra things. Does the Steeda spacers have everything I need if I'm going by their recommendation for which ones to get for my 2019 Bullitt with MagneRide

 

[ZeroTX]

This is not functional at all and I really really don't want to be mean but this is gross and looks like a skateboard. Listen to aftermarket companies that make spacers for track purposes. Steeda recommends 1' front and 20mm rear. and this is what it looks like on my car. I didn't use locktite or whatever I just used my tq wrench and tightened them to 150 pounds.

Sorry to dig up an old one, but considering spacers on my '22 w/ Black Accent Package 19x8.5" wheels and 255/50-19 tires. What are the original sizes/specs on the Bullitt wheels/tires? I dig how yours looks. Any other angles by chance? Direct rear view?

 

[Schwerin]

Sorry to dig up an old one, but considering spacers on my '22 w/ Black Accent Package 19x8.5" wheels and 255/50-19 tires. What are the original sizes/specs on the Bullitt wheels/tires? I dig how yours looks. Any other angles by chance? Direct rear view?

Bullitts are 9.5rear and 9in front just like performance package 1 wheels.

 

[Gamora]

Ahh, this is the spacer thread I’ve been missing. Lol Anyone with Magneride here running with the stock rear 9.5 wheels up front with 20mm spacers up front for a square setup? I will eventually pull off my fronts to measure the studs and the recession depth of rear wheels to do the math, but if someone’s here can save me the time so I can put in my order, that’ll be awesome.

 

[Ilem CZ]

Ahoj, mám to namontované a otestované.
Žádné řezání šroubů.
fakt dobrý!![PŘIPOJIT=plný]676563[/PŘIDAT] [PŘIDAT=plný]676563[/PŘIPOJIT]

 

[Gamora]

Ahoj, mám to namontované a otestované.
Žádné řezání šroubů.
fakt dobrý!![PŘIPOJIT=plný]676563[/PŘIDAT] [PŘIDAT=plný]676563[/PŘIPOJIT]

Thank you for these. Wow, those front stud bolt lengths look pretty long even with the 25mm spacer. I haven’t looked at the pockets of the rear wheels yet, but I’m starting to doubt they are that deep for a 20mm spacer. Lol

Sponsored