rozay
Well-Known Member
- Joined
- May 20, 2015
- Threads
- 42
- Messages
- 920
- Reaction score
- 151
- Location
- South Florida, Broward
- Vehicle(s)
- 2015 PQ 5.0 MT
- Thread starter
- #1
Don't know if this had been posted but wanted to shed some light on what I used to cover the intake tube and firewall. For the firewall I use a mastercylinder plug from Auto zone and for the intake tube I used a rubber tip from Ace Hardware. Here are the parts I used.
Make sure you use the 1 inch for a nice snug if over the intake tube.
Here's for the end result for a grand total of under $10
Make sure you use the 1 inch for a nice snug if over the intake tube.
Here's for the end result for a grand total of under $10
Sponsored